I dont think there has been any motor that has as much pop up potential as a banshee engine. A banshee motor can go from making 38hp stock to making 150+hp....
Just go ahead and do it man....it'll wash off.
I thought mine was gonna throw a lot of mud when I bought it, cause the fronts were cut, but I didnt ever get any muddier than anyone else.
You can turn a lectron alky carb into a gasser, but you can't turn a gasser into an alky.
All you have to do is put gass needles in it , and turn the dial a jets down.
you may have to change the pilot jet. I forget what the stock piolt is...I think its a 25. If it is, try a 30.
If its hard to start, you need to go up on your pilot.
I heard GTperformance is gonna show up with the 1000cc twin. I also heard thru the grape vine thats its currently putting out 165hp on pump gas. Should be a bad bitch once he switches to alky and sprays it!
wont let me post anything...says my session has timmed out. I tried it twice, the second time it took me a matter of seconds to post....still said the same thing.
I have a set of 35mm PWK's with the following jetting:
50 pilots
150 mains
CEL needle
These carbs were set up for a 421 cub.
Also have a 1 piece BOSS RACING billet intake, with built in cross over tube.
$300 for it all....+shipping