banshee76179

Now we don't want this 1 to get out of hand... Go to ur netural corners...

It better to have 1 person put it together instead of 5.. if U r not going to urself Everybody has his/her ways to do things..

less weight + more displacement= losing battle.......sorry.. but, giver hell anyway.. don't go down w/out a good swing!

get a uni filter cheaper than cleaning the old 1!

what is ur compression? where is it slow at? (before or during the power band)

Dammit!

shredders 4 me!

I would only use foam oil, that's just me though!

http://meph.eu.org/

How much did u advance it... Around here pretty much +4 is the way to go!

Dammit, I fell out of my chair!

Yep, I was at 52, well still am, but need to back off some. Oh, put your needle in the 4th clip from the top/blunt end, that should help the area of your hesitation. How is it starting, how many kicks? Yeah, did a rebuild of the carb...don't know what happen, but, I'm going w/flow.. was a little rich... But, it was fine w/me... Doing some tuning & testing yesteday, ran into a guy w/t6's ,371...185lbs cylinders 16cc domes,running aviator fuel....10 $ gallon "dammit" expensive!... To my disbelief "spelling", when we had to get off of it we were side by side! That thing just sounded and smelled fast! But, still working on the carb, just about got it though!

Sounds like the Stator or cdi box crapped on you!

Stator

That's what I have that's fine... mid to top of 5th through the stripe!

32:1 is the richest I'd go. More like 40:1 or 50:1 depending on the oil. That's right.. I haven't had to much luck w/32to1, 40 to 1 is what I run!

I'm at 600 ft... now, 42 piolts...185 main..needle in the 4th clip from the blunt end. air screw 2 turns out. Dammit! two weeks ago I was 48 or 50! Texas 4 U!

That sounds about right to me, maybe u might wanna play w/needle setting!

That's always the best, don't remember that could be "bad or good"!

On a good day 1 1/2 hrs,.. normal 45 to 1 hr. Ims 5.6 tank if u r going to trail ride! w/mods...

Stretch the frame.....relocate motor mounts.....adjust carbs......dreamin....

I have the trinity setup w/33mm keihin.. I'm 50 pilots... 185 main... 2 turns out on the air screw.. 4th clip on the needle! little rich! but it's getting hotter! I have fmf fatties though, not 4 sure on the 2in1 exhaust probably the same though! I'm at 600 ft !

Man u better be hitting the hard stuff... I don't know what time they stop serving but, here in Texas it's 2 am..

FMF !