brock_fuzzy_69

i am intrested in the top half of the kickstarter if you still have it

so i have 2 friends that are both in need 0of new front calipers for there zukes any idea how tough it is to rebuild them if anybody has soe that will fit jsut elt me know any chance that yoiu could swap brackets with them and use some from a banshee

thats the method our local shop uses its what he suggested for removing a case bearing on a dirt bike i had he puts a piece of plywood down on the floor and gently slaps the case onto it and the bearing usually falls out has the new bearing handy and frozen then slides it right in i would say that there is plenty of material in that case to keep it from any distortion

yeah only 1 clip is provided for each bearing surface the groove goes all the way around because of how it has to be machined in there but as long as each bearing has 1 of those clips its all good keeps the bearings from walking abck and forth in there

ouch ouch and ouch coudl be several things are you going to leak down test it before you take it all apart???

a few nice things about using the rZ jugs and head would be the much much bigger water jackets that tehy have and they use a thermostat wich i thought would actually be kinda nice for wintertime riding but i woudl get ahold of minkia or maybe he will pitch in his opinion since he has ran an RZ motor along with a stroker so he prob knows the pro's and con's of each one

to me they dont lok like they are from a banshee the sterring arm on them is dif than the banshee has the banshee has a bolted on steering arm on the spindle and those are one piece????

i got this for my shee but ti interferes with my nerf bars so its never really been on the machine before i am asking 75 for it???

stones are caused in part by what we drink drinks with lots of oxides teas soda and kool aid will let certain things buil up in our bodies and develope into stones and i bet that beer is one of them to but why stop drinkin it tastes too good to quit

yeah i def agree with you on that one if i lived out that way i would be up for a cleenup day/weekend ride get together i def agree tho that assholes like that are how we lose our riding places i live in il and i dont think there is a single state riding place in the entire damned state and the states that have all the nice places to ride publically have people from al over coming there and screwing it up for them

my personal thought is SK facom stuff its all been very impressive for me so far its all been damned good quality and at tiemsi buy it for less the the stuff at craftsman its all lifetiem warratied and the snap on and mac guys will hose you royally if you finance through them higher intrest on that than most credit dards

my fav is still the guy that wanted a stock bore set of juggs in trade for his ported ones that need resleeved

dings in the dome of the head are most likely from the motor having been blown up before bits and pieces of bearing piston or circlips are know to come up and dent the head when a motor goes boom maybe it blew up on you and maybe it was blown up and rebuilt veery very very very common to see the dings in a banshee head or any other 2 stroke for that matter

yeah clark i think they got that from the tank being 2.6 gal main and .6 gal reserve

i do that for cleanin parts soemtiems i cover in lighter fluid or i use laquer thinner.............whatever burns well and is handy works esp well for caekd on oil sludge on an engine

must be the same dope smokin idiot that brags on his EFI 660 cannibal from alba or whatever that make believe machine he has was called

wow the children from blue traxx wandered in for a visit

yep thats right

the picture fo the swiss cheese frame came from planetsand i think lots of guys do that if its a strictly sand drag only chassis the material at the center of the tube actually doenst doa whole lot kinda like if you picture an I beam the vertical section is much smaller than the top and bottom because the majority of the stress is int he top and bottom

i know i will catch hell for this the trx 250R one ugly ass machine its that hood on it that looks so gross kinda like how the suzuki's were ugly

that is a wicked lookin system but its not EFI its basicaly a hilborn setup liek they use on race cars and woudl still need to be rejetted for changing weather coditions

hey tats i will take that stabilizer off your hands

any chance that any of you guys coudl give me a link to packard racing

my basic simplified opinoin on president we arent able to se the full effects of the presidents actions for 4 to 6 years the economy is like a rollign ball when the president does soemthing to speed it up it takes a long time before we can see the full effect of his actions that being said obviously bill clinton fucked us over pretty good while he was in office so the solution is not to keep changing politicians each time i cant stand it when people will blame all of there lives problems on the president thats in office cause the ecomony that we have now is usually due o the former president thats was in office ah and the more moneyt he president spends and the further we go into debt the stronger our economy is ask any good ecomony professor about that one its very complicated to explain

i think that if you believe in conspiracy theories to this extent you need to step away from teh crack pipe and have your ass smacked back into reality i think some people have way too much faith in michael moore films or whatever that big slob of a man's name is and as for brooke i think woman who enjoy the company of other women is great sometimes its so much easier to hang out with a girl like that i really miss beign around a fiend i had who was a whole lot like brooke