I got one that has zero pitting. How about 20 shipped? Here is a pic of it. Pic is old and I'll get a new one if you want. I glass beaded it and its been sitting in a box. Hasnt been used since this pic was taken.
Trail tech lights. Mount in stock location. Some pitting. 75 shipped
Complete wiring harness. Includes two keys 55 shipped
Working CDI off a 99 Banshee 65 shipped
Front Sand tires on wheels size 21x7x10 100 plus shipping
Stock Coil with NGK Caps 40 shipped
Rear Brake Caliper with block off plate 60 shipped
Front Brakes complete from Lever to calipers 80 shipped
Rear Brake Master Cylinder with rezzie 40 shipped
Front Spindles 50 shipped
Front hubs with brake rotors 50 shipped
Did you do a leak down test when you put it back together? I've also seen heads not sealed properly where it doesnt allow water into the cylinder but will allow pressure to build in the cooling system and blow coolant out.
I'm pretty sure those are TDR reeds. If they aren't they are the same style. TDR reeds are a single pedal design and usually cut in the corner just like those. TDR makes good reeds. You can find replacement pedals at the link below.
http://www.ctracing.com/carbs%20&%20reeds.htm
Have a set of trailtech lights. They mount in the stock light location. Chrome has slight pitting. I also wired the stock light connectors on them. So you just plug them in and your ready to go. They are low beam only, so if you turn the light to high they turn off. Pretty standard for all aftermarket lights. They are 35 watt halogen. 90 shipped.
I have a CDI off a 99 Banshee. No stator though. I know the picture sucks. It is in good working order. If you want a better pic I will get it for you tomorrow.
65 Shipped.