Oilsmoke
-
Posts
910 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Everything posted by Oilsmoke
-
Would Changing Gear Sizes On My Shee Help
Oilsmoke replied to sandbanshee1818's topic in General Banshee Discussion
I ran a 13/42 At StAnthony and I am going to gear 13/41 this next ride. Some riders like the 14/44 too. 3.15: 1 ratio is good starting point. So I was 3.23:1 that was 13/42. 3.1538 is with 13/41. 3.1428 is with 14/44 so you see there about the same. Where do you ride sandbanshee1818? -
Personal Jethro Your Cool, If I have to pick between Eric and Nax for the biggest asshole I Pick ERIC. For Slamming other Banshee riders. But with the Internet you need Nyuks sense of humor.
-
MERRY CHRISTMAS TO ALL YOU HQ MEMBERS
-
All you need to understand is a good persentage of the members are Very young. they ask alot of question etc. Some are full of them selfs and other Love to help. So Remeber You don't have to Read It & diagree.
-
FixitRod Oh Old man a walking. Have great day bro.
-
Would Changing Gear Sizes On My Shee Help
Oilsmoke replied to sandbanshee1818's topic in General Banshee Discussion
ROTGLMAO -
Make sure your slide is in right. My sons friend had a bad right cyclinder not hitting and the problem was He installed the slide in Wrong. it ran like it had a choke problem or some thing weird like that. The cutway goes to the air filter side of carb. It running Great now. Kids, you need to watch them
-
So Is removing the Clutch Cushions good or bad idea? Any body try this? if so what was the results?
-
Ya I do Skat-trak wedpage look for there Contact info.
-
Jim I have a Question for you. Have you ever ran a Set of Jim Shearer drag pipes on your 12 port 370 combo? I just sold my Old set of FMF golds to help pay off the visa so it's looking like about May before I can do my motor.
-
For what?
-
I Agree with Nyuk. I wish I was Frosty
-
I buy a Dremel and port & polish it . Mill the head .030 Get some K&N's If it was for Dunes Only.
-
I asked my Son. He had PC with Cut stock air box lid with K&N and was running 280 Main on his 2003. his bike was stock but the PC's& K&N's Hope this helps.
-
Thx for that measurment On the Back cut It helped alot.
-
The One key factor is with a 2 stroke, Is you MUST want to wrench on it to keep it in tune. If you don't like to Wrench then Get a 4 stroke they are less prone to engine failure if not maintained. AS you can tell from the other posts you most likey siezed and scared the cyclinder wall & pistons from a Too lean condition. .
-
Try Toomey website. OR call them
-
Clean the contact surfaces in the switch.
-
we are running 360s in my Son's 2003 shee.ANd we live a 4400 feet and I think we can run 380's What comes in them stock?
-
What Size Carbs Will Give Me The Best Bang For $
Oilsmoke replied to bigtreads's topic in Banshee Repairs and Mods
Try Toomeys Website for Throttle Cable 19.95 If your tors are removed. Than Follow Screamin Banshee advice and Buy all Us a Beer with the Saved Cash. -
Where is a good place to Buy UFO Plastic?
-
Port than Bore.
-
I ported my With TDR's Total Cost 33 dollars and Some change. Timing plate from ricky stator Shipped 45 dollars and still have 120+ for BEER. OR K&N's Can't beat that With a Vforce.
-
Shifter star mod makes for a smoother, faster shifting with less foot presure and easyer to find netural Banshee.
-
Boonman How much of a cut .040 or .030 for the shifter wheel to fall in? I am talking about the backcut.