Oilsmoke

Itsaripper I agree with you on a cleanup, the tranfers is very Good & safe way to go, And going is what it's all about. A Cleanup to me Means remove the paint and texture. Without removing metal. On the cyclinder liner I went little farther. the 90 degree edge on the stock liner I took half of it's width and 45'd it so the gases could flow over the edge easyer Didn't change the shape of anything. Oh and It's A Ripper for free. But the Gians on a Clean up Are worth it. My Sons SHee fast out Haulass for a 350.

Well Time has come for Passion 12 Port stroker. But i was think about it and never asked Jim what size will it be. I think the cyclinders will clean up at 65mm so what is the stroke Plus 4mm make this motor size in cc's?

Yes Speed150 Stuff is Nice I bought about 10 parts from them. Very Happy with it.

It Smells

I think if you Buy a Banshee And you what to use the Name you better Make that Sucker S C R E A M! ! ! ! ! like it Should. A Banshee can be made to do allot Good but It's Only Great at Acceleration.

Damm It I was out Bid. 13001.01 Dollars thats half years wages for me.

Personal you should contact Noss Machine and see if David will cut you a Custom dome for the Big Bore in a smaller size 19cc maybe. I sure he can do it. Than your Race fuel Not a waste of money. It will wake that bitch up for sure.

Hope you Like the Denver Broncos

Hmmmmmmm Black & Chrome can't be beat. If your Plan is total stripped down naked sand shooter your not going to have alot to Paint Chrome frame would be to much IMO.

Ducman what Type road bike do you ride?

Old worn Lace up Work boots I can shift fine.

21X12X8 8 paddle hauler Slide good With a little blip on the gas and Hook up great in a straight Line. GIKO Only Look cool, other factor suck, Oh they do throw alot of sand in the Air but you can't roost your buddys in the back Muhehehehe.

So is pinning better?

Proquad What type & size carb you running ?

Well Jim I got a question Have you talked with Shearer On specs of his production pipes as so to maximize the porting if that is how it's done?

A Z400 can't even climb Half way Up Chokecherry.

Well I am not Sure what Jim thinks of Shearer But there are few others that have them on his Motor. I belive Jim could Port for any pipe .With all those years under his belt I bet he forgot more than most will even know about the Art. But if i didn't think Jim could do it I'ed be on another thread. I like to See how a grunt motor like Blue duces would Work with a Shearer on it. Best of both worlds maybe. Jim what is your take on this High RPM pipe?

I have to run the 34 mikunis Rounds slides. I moslty drag the hill (70%) and criuse the dunes (30%). I need to run with some Fast 87 Quadzilla's that my Best friends and there son run. Oh Big Blue are you stroked? I am getting the 4 mill if my Cylinders are ok for the 12 port. After Jim gives them the once over, I call him and we will make the choice. I may need to stay on the topend becuase of where my Exhaust and intake where cut before i bought the shee. But Yes that sound like my Cup of TEA. to lumps of sand please.

SO it Not the Mormon cricket? them things are UGLY.

those Bettles had one Big horn on there head?

Blue have you ran Paddles on your Motor Yet? I need to start thinking about gearing. We ride St Anthony. Idaho Mostly and I am sure Sand Mountian Utah. Some of the steepest stands of Sand around. My Shee came with a 13/42 and maybe 60 Hp Powerband was Very short and Didn't hold it unless you where just plan Balls out.Do to the 34mm RS Mikiunis & no bootom end. Furture plans are for some TMX carbs in 35mm if Jim, thinks there ok. Those should feed it. I could climb are race hill (Thunder) in 4 gear it things where just right, but mostly in 3rd. It's pretty fast Shee for sure but it's no Stroker. I do 2nd gear start too. 1st was waste of time. Where would be a good starting point for gearing? I just glad at 45 year old I don't need to look out things to hit on it. Dunes are good for Old but not Slow guys. This will be the Logo on my riding jeresy to Piss off my cocky 21 year old son. Muhehehehehe had to play with the new smiley.

Ops Otis Yes but i Run a LSR axle and they are 30mm Nuts.

Well the Hook got set. I am removeing my cyclinders and they are off to jims monday or tuesday. Blue & jeffro you guys are great saleman. I am almost afraid to ask for a Balls out Hill drag port. NOT. Do you guys think a 5 inch swingarm & never ran 9 paddle hauler handle this Motor?

It's Political Now. Squatters have rights too. Don't burn out on the Chickweed at the sand dunes or the Sierra Club close that Down. You have a valid points Tho. But sometime Others out side the ATV world are alot Bigger pain in the ass that someone riding up the old creek bed he grew up on. IMHO screw the Horseshit you rode in on. I was talking about the Guy that NARC'ed him off.

I know what works Great, 110 PSI 250Ftpd OF torque Air impact gun and 30mm socket. :