trail rider

I was wonderin if anybody else has seen this wierd burger king commercial on tv? Its got this cowboy singing something about a "tender crisp bacon chedder ranch" or something and a bunch of hot chicks with big tits and asses eating big burgers and stuff I wonder what those guys drinkin when they made that? Its wierd but I like

Omg i just read this entire thread in 40 mins! and i must admit that there are some hiliarsily fucking funny messages on here. and about this kid you all are talkin about....hes a pussy LITERALLY. lol im still laughin about some of the shit yall said about him

hey all, i understand that prolly a lot of people have this problem, where the grill cover bolts on. i was wanting to know is there any way that that it can be fixed where all the bolts go on.. when i go wide open down the road it sorta lifts up a lil from the wind lol.

I love it! yay yea

yea, I finally found the maker of that thing after looking for like a month online. Some company called zing fu or xing fu or some shit like that in korea makes it. I thought it was cool cause it had a twin cylinder honda rebel motor with dual chrome exhaust and big ass mud sharks on the back. I was temped to buy it for 2100 but I couldn't find where to get parts for it . I just hated the way it feeled. Felt just like riding a dumpster with really tall handlebars and stiff ass suspension. And the swing arm had a really fucked up design.

I gots some bill's pipes on mine. They sound really good at idle and when you rev em and it rips when your on the pipe, almost the same as fmf's. They are a really good pipe for trails, good low end, great mid, and pretty good top ( I'm geared pretty low , 13/41, so I dont know how it does with higher gearing). If you wanted something different instead of getting what everbody else has, these would be a good choice IMO

what ever you do, don't put money on that race, cause more 'n likely you will lose. Have you ever even rode one of those big bore 4 stroke race bikes? I rode a 426 w/ a white bros pipe and some other stuff for the first time ever yesterday and all I can say is, gobbs of torque, gobbs of power, and it fuckin hooks up all the time . When I would hammar down on it, the front end would raise in every gear, and I was sittin on the gas tank too! The only thing that sucks is if you stall it, then it is you have to do 5 different things to get it started and you'll wish you had a 2 stroke If your one of the type of guys here who think 4 strokes are for pussys and wussies, go ride a 450 and you will change your mind It scared me more riding this then it did the first time I rode my banshee. And there is know way my banshee would beat one of these in a drag, cause i am geared to low and all I do is spin on take off while that 426 is bye' bye

what about those carlisle power trac II tires? I can get a set really cheap at this tire place and I would like to try em out, I think they look pretty cool. My cousin has those tires on one of his grasshopper mowers, he does commerical mowing. I've mowed sideways on some pretty steep hills and those tires really hold up pretty good. They dig like nothing else in grass and dirt and stuff, but I guess its kinda hard to compare using them on the banshee, seein how there's a pretty big weight difference between a mower and a quad.

Where is a good place to buy a set of 8 inch rear wheels at? In the rocky mountain atv cataog, it says they have itp steel bright silver 8x8 inch wheels for $19. But I cant find where to order just the rims on their site, they only have package deals with their wheels. Does the banshee have a specific bolt pattern? And if so, what is it? I need some 8 inch rims cause these tires that I'm wanting only come in one size and it only fits a 8 inch rim.

does anyone even know what im talking about? The tread is like a cheveron/ tractor type lug with knobs on the side. Another tire that looks like it is the carlisle power trac II. Its used for lawn mowers and other equipment. The only thing though is that I would have to get a 8 inch rim cause thats the only size they come in. Would these tires hook up good in dirt drags and on trails and hills and stuff?? Heres a link if you want a pic. http://www.gallaghertire.com/carlisle/powertrac.html

well, not EXACTLY that high, maybe 10 or 15 feet high, but I was throwin it about 30 back behind me. When I would stop doin a doughnut, it would take like 2 seconds for all the mud to fall, and most of it fell right on top of me

You wouldn't ride a banshee in a little mud? The other day after it rained I went out and cruized my trails and hills to check how much it rained. Most of my trails and hill climbs were pretty muddy. The mud was like 1 or 2 inches deep (before it rained it was all loose dirt and loam) and below it was hard packed and slick. I'm runnin a set of used bandits on my banshee and I didn't have a problem climbing any hills. Maybe I spun the entire way up in 3rd gear but at least I made it to the top . In front of one of my hills there is this big open grassy spot that was muddy underneath. My friend was with me on his blaster and we decided to do some doughnuts and roost each other and stuff. I was doing big wide doughnuts in 3rd and 4th gear and throwin roost and chunks of mud and grass the size of soft balls probably 30 or 40 feet in the air. It was the most fun I had ever had riding

does anyone even know what im talking about? The tread is like a cheveron/ tractor type lug with knobs on the side. Another tire that looks like it is the carlisle power trac II. Its used for lawn mowers and other equipment. The only thing though is that I would have to get a 8 inch rim cause thats the only size they come in. Would these tires hook up good in dirt drags and on trails and hills and stuff?? Heres a link if you want a pic. http://www.gallaghertire.com/carlisle/powertrac.html

Has anybody here used or know anything about the kenda dirt dog tires? I tried posting this in the review forums but I dont think anybody even goes there . They look like they would hook up good on the trails and hill climbs ( thats where I ride ) Would they be very good at sliding, like in a grass field or something? Would they throw good roost?

There is a boy in my welding class who put a yz 490 engine in a blaster. He's a good welder so it wasn't to hard for him to make the engine mounts and stuff. When I first seen it I thought, thats one big blaster motor, Then when I found out that the yz 490 was air cooled, I was like wtf? The two motors almost look exactly the same, except the 490 is alot bigger and has a bigger pipe (almost the same shape too). I haven't seen it run yet, I think he has a few things to fix on the throttle or carbs or somethin? I'm sure it will be one hell of a ride

Has anybody here used or know anything about the kenda dirt dog tires? They look like they would hook up good on the trails and hill climbs ( thats where I ride ) Would they be very good at sliding, like in a grass field or something? Would they throw good roost?

Klotz benol for mee at 32:1 Smells really good. Might be changing to the super techniplate though, that benol is kinda hard for me to get

i live in kentucky, what part does this dude live in?

are they in good shape? are the ball-joints in them already? i dont need a wore out pair. post a pic of them if ya can

hey on my shee the right bottom a-arm ball joint was screwed up so the last guy that had it put a bolt through it as a temporary thing. so i was wanting to know if any body on here has two lower a-arms with good ball joints in them(im replacing both cause the other one is wore also. thx

i know i dont know how to. i've already went to the add attachment part on adding a reply...it just doesnt work ne suggestions?

i might not need to be saying this, but on my 400ex i have the holeshot and they have been on their for over 4 years lol. and they still arent wore out! still got 1/4 tread left and i do a bunch of ridin with it-trail, road, gravel. but between the razars and turfs go with turfs they do good in all kinds of conditions but dont wear out as fast as razors

my banshee's tranny oil has been running on some kind of gear saver oil, i think its somewhere in the 80w? well neways after i changed the oil after a lil coolant leak in the motor i didnt have any more tranny oil so instead i used good ol fashined SAE 30 motor oil.....will this hurt my engine? will it make my clutch slip?

heres the picture it hasn't been painted yet cause its i got done at midnight and wanted to come in

ok but i dont know how to post a pic on here