blueshee03

ok i could use an aftermarket +6 or +8 round houing swingarm,maybe drag pipes out of frame,lectron carbs,marvin shaws,i'm not saying i will only trade even up ,i may deal if its something i can use.let me know what you got.

it's a stock head thats been milled to match the cylinders for the 7mm stroker.

225.00 shipped

one more time.anyone?????

i have a set of cylinders that were ported for a 7mm stroker with head that was milled to match.cylinders need resleeved.for sale or trade for +6 or+8 drag round housing swingarm,finish don't matter as long as it's in good condition,or some thing else i can use.

bump

i'll trade for a +6 roundhousing swingarm.finish don't matter as long as it's in good condition.

i have a set of cylinders that were ported for a 7mm stroker with head that was milled to match.cylinders need resleeved.for sale or trade.

i saw a stock axle posted for sale on planet sand.also a few on ebay

your timing aint to far advanced is it?

that was a good one.lmao

thats easy.its a four stroke.to fix it is even easier.trade it on a two stroke.lol

i don't know what mods if any u got to motor but try race fuel.if i run pump gas in my motor the right cylinder dies .i tried everything to get it to run on pump gas and nothing would help it .i really wanted to run the drags and told my son i was running it anyway .i put some of his turbo blue in it and it grabbed both cylinders and man did it run .don't know why it drops right cylinder on pump gas but it does and the only way it will run on both is on race fuel.try it ,it might work for you.

whats wrong with his porting?

could anyone give me an idea what size jets to start with .i have 35pwk's,mild port job ,stock crank.i have a big reed conversion and i am running yz125 reeds.

how much?

bump

i'm lookin for two 10"by 4" wide front rims for my drag banshee.don't need tires just rims.cheap

i'm looking for a set of used 36mm lectron carbs set up for gas.i may also be interested in a used set of lectrons a little smaller or a little bigger than 36mm set up for gas. at a decent price.if anyone has a set for sale pm me.

i race eigth mile dirt drags and the last race i ran grr's a couple runs then switched to my cpi's a couple runs and noticed no change in my e.t's. they pulled the same to me.i had a set of shearer in frames and they pulled smoother from bottom to top but the bottom was less than grr's and cpi's.on my motor set-up.if you got the right motor set up and gearing plain old fatty's will work as good as anything.

i have a 1984 toyota 4 wheel drive pickup for sale or trade in pennsylvania. powered by a small block chevy v-8 chevy automatic tranny with a shift kit edelbrock intake and edelbrock 4 bbl carb chevy transfer case body lift and suspension lift b&m ratchet shifter block hugger headers dual cats and flowmasters 3 inch exhausts 4:10 rears needs some work but was driven daily up to two weeks ago.has a good pa inspection sticker.anyone interested i can e-mail pics.

thats pretty good i think ,i never ran 300 ft but i run eigth mile dirt and i run 6.5-6.6 i got a buddy with a t-rex and he ran a 5.7 he has another banshee with a stock cylinder port magic motor and he's run a couple of 5.9's

i have a set of 34mm pj's on gas for sale $225.00

sorry on the carbs but i need 38mm or bigger,no round slides and as for the swingarm i am wanting to get a chromoly swingarm,it can be bare metal as long as its a round housing in good condition.i may also pay a couple extra bucks if i have to.

i have a pvl ignition for a banshee.$300.00 or trade for a stock length or longer round housing swingarm or 36mm or bigger mikuni tm's