Jump to content

blueshee03

Members
  • Posts

    895
  • Joined

  • Last visited

Everything posted by blueshee03

  1. ..
  2. my son uses engine ice in his stroker and it works great.his motor runs super cool.as for winter use,we live in the mountains of somerset county ,pennsylvania and it gets downright cold here in winter and it never froze up on him.so i guess its ok to use it year round.
  3. anyone have a used alum drag axle with hubs they want to sell?pm me
  4. in my oppinion i'd stick with the castor 927.the extra 1.00 is worth the satisfaction of knowing you got good oil.
  5. i would say with stock gearing probally low to mid 8's.try 16 front and 40 rear.
  6. i have a new set of 38mm mikuni tm's that were used only a couple hours.anyone have a set of lectrons they would want to swap or deal .i am looking to get a set of 36/38 lectrons or close to it.
  7. depends alot on gearing you have.you could run high 7's to low 8's
  8. is anyone on here from westmoreland county in pennsylvania?
  9. where in west virginia you drag race?theres a place called thunder valley dirt drags in wv i'm going to try when they open
  10. after we give it a test run or two we'll let you know what it's like.in the mean time if you talk to jim he might explain it to you.i think it's gonna be pretty much a drag only motor.
  11. it's a secret.lol
  12. i bet this new x3 is gonna be completely insane!lol
  13. my son just got his x-3 motor from jim and i wanna see this baby run.he had jims 12 port stroker last summer and the biatch screamed.the guy knows his stuff.
  14. i've reused them a couple times.always with good luck .not good thing to do but sometimes you gotta do what you gotta do.
  15. that'll be neat power band.mine keeps snapping and everytime i change it the bolts break off.lol
  16. my son has a passion stroker and it makes his banshee do what a banshee is supposed to do SCREAM!!!!!! he liked his first motor from passion and he has his second on the way.i have him doing my cylinders now and in my oppinion he knows his stuff.as for a & s i can't say anything bad or anything good about they're motors i never seen one run.
  17. hahaha trinity.i got a toomey motor that trinity can,t touch.and its still a 350.of course he,s retired now and can,t build you one .if you buy a $ 2000.00 trinity motor you will get a $500.00 motor with a $1500.00 name on it.my oppinion of trinity.go with someone who takes pride in they're work and is'nt selling they're name.
  18. i'd go with passion,if you listen to jim he will make it scream.
  19. of course you may have to special order the smaller sizes from sprocket specialtys.i did.they also sell the blanks they don't have center cut out and you have to cutit out yourself.
  20. if you got the older 4 bolt hub you can go down to a 36 t.thats what i run.if you got the newer 6 bolt hub you can only go down to a 38.
  21. hey anyone on here ever been to "THUNDER VALLEY DIRT DRAGS" in west virginia?
  22. i think its possible but hard to do.i run a motor that is all stock except for a big reed conversion,mild port work ,milled head,toomey pipes and 34pj's and at the time they dynoed it it was putting out around 82 hp on gas.
  23. if the magura clutch is complete i want it.
  24. whats the price for the j-arms with shipping?
×
×
  • Create New...