Leaderboard

First, the outer plate only goes on 3 of the 6 ways so the splines engage. There are arrow to go by on the plate and hub. The ones on the hub are in the dots so are hard to see. Either way, put it on so the splines engage. Second, completely loosen the cable at the handlebar lever. While pushing the actuator on the top of the case over with your finger against the return spring tension, screw the adjuster in the center of the pressure plate until the arrows line up. After all that, adjust at the bars for a little slack. Done And welcome to BHQ

Hello ! I come often on the forum, it is a great source of information for me I from belgium and i have Banshee 421 for road only. I need your help to understand what it can cause this kind of problem : Why did I have a degraded piston and dome ? This is my setup : Assassin's cylinder 68mm Piston 68mm WISECO Keihin PWK AIRSTRIKER 38mm (mainjet 200) with UNI pod air filter dome 21cc Vforce 4 intake Chariot (no boost bottle) exhaust Shearer OOF smallbore spark plug BR9ES or BR10ES High voltage coil Dynatek ignition advance +3° squish 1.27-1.35 My spark plug are black in low speed and brown in hight speed... The banshee generally turns at 70-80 °c and I reached 90 °c one time because I was in a traffic jam on the road. Can you help me to determinate the nature of my problem ? Thank you !

Can't be a pussy all your life. Lol! Says the old guy! Haha! Sent from my iPhone using Tapatalk

Oh, and have you ever seen the balls of a field mouse? They are huge in comparison to their body size! Sent from my iPhone using Tapatalk

I wouldn't call it afraid. I'm just not 18 anymore and don't need to validate my manhood with child's play. I'm sure you can find somebody to play with you though. Don't give up so easy. Sent from my iPhone using Tapatalk

Looking at the driveline stuff..... going 4mm stroker crank, HP cylinders and there cyl head with domes, isn't much more cost wise. Just have to split the case is all.

Going up on FB I guess....fuck, hate dealing with the idiots

Wow.....did you leak down test before dis assembling. Not say you had an air leak, but always a good idea. Have you taken your pistols out, and what do the rings look like? Seems like something bounced around, and around in there knocking the shit out of it. If that's detonation that's the most spread out detonation I've seen. Following, and ready to learn something. I'm sure far more experienced guys will chime in. Sent from my SM-S820L using Tapatalk

Something tells me you haven't ever split a set of banshee cases. Sent from your mammy house