Shifting problems on my banshee

[banshee1998]

ok, heres the problem. last time i rode my banshee i was having troubles shifting. felt like it was hard to get into gear. and also i couldnt get the trans to go into nutural at a compleat stop. would have to shut the bike off to get it to go into nutural. today i started it up and was in nutural just reving the engine up, and all of the sudden it droped into gear all by its self and stalled out. now it seems like its stuck in gear now. i cant get it to go into nutural at all. have to pull the clutch in to push bike because it wont go into nutural. so my question is, what do you think happend?? any help would be great.!!

[locogato11283]

how does your clutch lever pull feel? how much play is in it?

[LS1Inferno]

so how high was it reved when i dropped into gear, and its stuck in which gear?

[banshee1998]

for the clutch play it starts to grab about 3/4 of the way released. as far as which gear it is stuck in. i am not sure. see it feels like it will go into first and can click it up to second. but i can never get it to drop back into nutural. even with the bike shut off it wount click into nutural. i have to pull the cluch lever to get the bike to push any where. other wise its in a gear and the back wheels grab any try to roll the engine over.

[LS1Inferno]

so can you get it into any other gear?

[banshee1998]

when i let the cluch out it stalls the engine every time. i put it what i think is first and try to let the cluch out and it dies. i clicked up to what i think is second and had to really rev up to get the bike to take off. and then it just dies and locked the wheels up. but every time i try to let the clutch out to take off it just dies. i am really stumped on this.

[P-man]

when i let the cluch out it stalls the engine every time. i put it what i think is first and try to let the cluch out and it dies. i clicked up to what i think is second and had to really rev up to get the bike to take off. and then it just dies and locked the wheels up. but every time i try to let the clutch out to take off it just dies. i am really stumped on this.

is the shifter grabbing at all and clicking or does it just go to the floor?

[papa_smurf49319]

Grab your shifter lever and see if you can pull it out and push it in at all, if you can pull it out a bit and see what the does. By pulling on it i mean horizontally!!!! :cool:

[LS1Inferno]

your deffinatly not stuck in 1 and 2 id say 3 or 4 if not higher, if its 5th then you need to tear down and put an input shaft they lock up on these with low oil or revving it really high in neutral or witht the cluch in. if it jammed into gear revved up then just tear it down and post pics of what you find.