dj_diablo54 Posted December 10, 2007 Report Posted December 10, 2007 I wanted to get some help about choosing some new carbs. Not much is done to the bike just some Fatty pipes. What do you guys suggest Quote
00tbanshee Posted December 10, 2007 Report Posted December 10, 2007 stock carbs i agree :thumbsup: Quote
2strokespirit Posted December 10, 2007 Report Posted December 10, 2007 agree, stay stock. Save the money and get some V Force 3 reeds, K&N filter and cool head with the right domes for your needs. If the motor needs rebuilding, port it and then you can look into some new carbs. Quote
dajogejr Posted December 10, 2007 Report Posted December 10, 2007 I'll say 28PWKs only because even with the TORS removal, stock carbs are a POS if you ask me... But, you could save that money for other/better mods before replacing the carbs... Quote
shanYE west Posted December 10, 2007 Report Posted December 10, 2007 I'll say 28PWKs only because even with the TORS removal, stock carbs are a POS if you ask me... But, you could save that money for other/better mods before replacing the carbs... Way to go and be different Dave.. :biggrin: I aggree.. the stock carbs are junk and the 28's are a good choice for the moderately stock engine up to a modded duner. But like you said.. There is other things that could be done that would give a bigger bang for the buck besides carbs. Quote
dajogejr Posted December 10, 2007 Report Posted December 10, 2007 Way to go and be different Dave.. :biggrin: I aggree.. the stock carbs are junk and the 28's are a good choice for the moderately stock engine up to a modded duner. But like you said.. There is other things that could be done that would give a bigger bang for the buck besides carbs. Gotta be different to try and keep up with you...LOL... Quote
98 shee devil Posted December 10, 2007 Report Posted December 10, 2007 stock cabs untill you are heavly modd'd and need the higher flow of gas. save your money and like suggested above go wit the reeds and cool head and such Quote
wacko2000 Posted December 10, 2007 Report Posted December 10, 2007 I agree with the above,, there are alot of guys on this site that have some port work and other nice mods and are still rocking stockers, including myself... Save your money, bump your compression, get some v-force reeds, what till your ready for a rebuild then get some porting and bigger carbs.. If you do a search timing advance is suppose to be a great mod for the shee and it is very cheap... timing plate 35 and puller 15... I do agree that th stockers are a POS but if you are a weekend warrior and you get the jetting real close they will be just fine for now... Quote
Aussie Quad Racer Posted December 11, 2007 Report Posted December 11, 2007 depends on furthur plans for the bike and your type of riding, i suggest and prefer the single carb setup though Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.