LS1Inferno Posted November 30, 2007 Report Posted November 30, 2007 ZX9R banshee picked it up like this. havent had time to work on it more. Not sure how its going to look finished, need more parts before i can re-do the frame. Quote
Dinner Posted November 30, 2007 Report Posted November 30, 2007 Should move pretty good once you are finished. Build looks good so far, good work. And good luck :beer: Quote
LS1Inferno Posted November 30, 2007 Author Report Posted November 30, 2007 Hope the good luck is for surviving it not finishing it, that the easy part. LOL Quote
Dinner Posted November 30, 2007 Report Posted November 30, 2007 Hope the good luck is for surviving it not finishing it, that the easy part. LOL lol It can be for both :biggrin: Quote
wacko2000 Posted November 30, 2007 Report Posted November 30, 2007 Man that thing is going to Rip.. How much does that motor weight about? o0o yea and good luck Quote
LS1Inferno Posted November 30, 2007 Author Report Posted November 30, 2007 The motor weighs maybe 60-70 pounds i think, havent had it out of the frame and lifted it. It should help keep the front end down. Quote
Bansheekid07 Posted December 1, 2007 Report Posted December 1, 2007 thats a beast lol. that should move prity good..... :biggrin: Quote
jayzx10r Posted December 1, 2007 Report Posted December 1, 2007 It should haul... My '99 ZX9r put 131 RWHP to the ground with a pipe/jet kit/air filter. Just remember the carbs are set up for "ram air" so make sure you run the pressure line to the float bowls to balance the pressure. Quote
LS1Inferno Posted December 3, 2007 Author Report Posted December 3, 2007 It should haul...My '99 ZX9r put 131 RWHP to the ground with a pipe/jet kit/air filter. Just remember the carbs are set up for "ram air" so make sure you run the pressure line to the float bowls to balance the pressure. I dont know a lot about bikes, could you explain more please? And do i need that huge pointless looking PCV system thing? Quote
TwistedBanshee Posted December 14, 2007 Report Posted December 14, 2007 ill have to keep an eye on this, my just be tempted to cram my zx9s motor in my banshee Quote
jbooker82 Posted December 15, 2007 Report Posted December 15, 2007 ill have to keep an eye on this, my just be tempted to cram my zx9s motor in my banshee I would use a raptor over a banshee. Look at the frame there is much more room to stuff a taller engine in. Look at locogato11283's Loco's Raptor Quote
TwistedBanshee Posted December 15, 2007 Report Posted December 15, 2007 I would use a raptor over a banshee. Look at the frame there is much more room to stuff a taller engine in. Look at locogato11283'sLoco's Raptor Ive always liked that bike, definately a very clean swap Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.