06BaNsHeE Posted January 2, 2007 Report Posted January 2, 2007 Ok guys well I took Of my six pack rack because I didnt want to find out what would happen if I scrape.I have the stocker now thats pretty beat up because all the scrapes.Which one you guys think would be best for someone who scrapes alot?I want something to make sure im just going to scrape amd not flip back or anything.So which one?lol Quote
ClimbAnyHill Posted January 2, 2007 Report Posted January 2, 2007 Cheapest way would prob be to buy used stock ones. Why buy something nice & new if it's going to get trashed? :thumbsup: Quote
ellison445 Posted January 2, 2007 Report Posted January 2, 2007 I second that bigtime, and by the way if you wheelie all day your bar should not be bending if you got good control over the brake :thumbsup: :thumbsup: PRM desert grab Quote
yfzdunejumper Posted January 2, 2007 Report Posted January 2, 2007 PRM makes a very nice strong grab bar (thats what I have on the 450 but they are the same) but remember when you go over if something need to bend it is better your grab bar bends than your sub frame. I don't know if it would bend I think you sub would bend before the prm. Like ellison445 said the foot brake is the key to not scraping your bar Quote
Animalman294 Posted January 3, 2007 Report Posted January 3, 2007 Yeah, it costs a lot more to buy a new subframe than a grab bar, but the brakes are the key to not trashin' your ride.............. :thumbsup: Quote
Dead Op Posted January 4, 2007 Report Posted January 4, 2007 I have a stainless one I made myself, holds up alot better than the stock! I also made a rear skidplate out of stainless that is only 1 pound heavier than my old aluminum one but holds up way better! IT's bulletproof :thumbsup: Quote
BigRed350x Posted January 5, 2007 Report Posted January 5, 2007 GUSSET YOUR SUBFRAME! If you hit that grab bar a lot it will start to crack your frame after a short time. Quote
Barrymaxx Posted January 6, 2007 Report Posted January 6, 2007 I make my own grab bars. I made mine out of 1x1 angle iron for the sides, then welded a peice of pipe between them so it still feels nice on your hands. It takes a beating, but WILL bend before your subframe does, thats a good thing. Quote
bigdaddy69 Posted January 22, 2007 Report Posted January 22, 2007 I second this motion....when I first got my shee about 4 days later I was practicing my wheelies. Poped her up in first, then accidently poped her in second in the middle of a wheelie pretty much at WOT....scared the shit outta me and bent the hell outta my grab bar. luckily nothing happened to the sub frame, or me!! I just held on for dear life rolled to a stop jumped off pushed her back over and rode away....still need a new grab bar Quote
dante Posted January 26, 2007 Report Posted January 26, 2007 Second is where I pop my wheelies because first just spins on dirt. I dump second and up she goes... Quote
NY350twin Posted January 26, 2007 Report Posted January 26, 2007 Mine finally broke off from scraping so much, anybody got a stock or aftermarket grab bar for they want to sell for a good price ?????? Quote
uallsuk03 Posted March 13, 2007 Report Posted March 13, 2007 i was actually thinking about getting rid of the shee cuz i could not pop it up. but i loved the two stroke so i stuck with it. i learned in about n hour to get it up high. i do it in second i just keep the rpm up pin the trottle and lean back hard then stand up and ride it. Quote
FireHead Posted March 13, 2007 Report Posted March 13, 2007 PRM desert grab That's exactly what I was thinking. :thumbsup: Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.