excess Posted October 26, 2006 Report Posted October 26, 2006 My cpis make a mess of my six pack rack i can never grab it with out getting my hands filthy, I was looking at getting some of toomeys hangers and seeing if i can mount them lower. Anyone with some input on what you did to prevent this? Quote
locogato11283 Posted October 26, 2006 Report Posted October 26, 2006 sounds like you need to lean up your mixture some. if youre blowing out a bunch of shit that means all the oil is not getting burnt off and theres too much in there. what oil are you runing at what mixture?? i run klotz at 40 or 50:1 and i dont get any junk out the rear end... Quote
excess Posted October 26, 2006 Author Report Posted October 26, 2006 every bike from our group no matter how dead on tuned it is gets this way with cpis put on another set of pipes and not a spot, it makes no sense. Quote
locogato11283 Posted October 26, 2006 Report Posted October 26, 2006 you didnt answer my question. what mixture and oil?? Quote
ellison445 Posted October 26, 2006 Report Posted October 26, 2006 I ran CPI's and never had that problem. I did have that problem with my rockets, but My main jet was way too fat. Adjusted my jetting and fixed that problem :beer: Tyler is right also, What oil and Mixture are you sunning? Quote
excess Posted October 26, 2006 Author Report Posted October 26, 2006 I run pennzoil marine grade oil nothing fancy 4:1 Quote
locogato11283 Posted October 26, 2006 Report Posted October 26, 2006 I run pennzoil marine grade oil nothing fancy 4:1 hmm, marine grade?? i think id switch oils if i were you. run some klotz or amsoil or something else. so u think that the cpis are causing this junk and other pipes are fine? Quote
excess Posted October 26, 2006 Author Report Posted October 26, 2006 Its just unburnt oil, oil burns to Quote
ellison445 Posted October 26, 2006 Report Posted October 26, 2006 How many rebuilds you guys do a year?? Your running some real shitty oil, That shit is for boats!!! Its just unburnt oil, oil burns to Quote
locogato11283 Posted October 26, 2006 Report Posted October 26, 2006 Its just unburnt oil, oil burns to Quote
dawarriorman Posted October 26, 2006 Report Posted October 26, 2006 Definately ditch the marine crap oil, and get something made for bikes and atvs. Quote
excess Posted October 26, 2006 Author Report Posted October 26, 2006 Lol, shitty oil, because boats blow up left and right because they use this oil. 2 stroke oil is 2 stroke oil if you want to go spend a ton of money because your oil smells nice that's your preference Every time we take the motors apart the cranks are well lubricated and pistons are clean as a whistle Tcw3 gets the job done and then some, just cause its says marine doesn't mean you can't put it in a weed eater The bike is rich right now because we haven't gotten aroud to tuning it once we do ill are if it improved at all Quote
Leadfoot350 Posted October 26, 2006 Report Posted October 26, 2006 4 to 1 ratio???? geezzz try 40 to 1. Quote
noslo98 Posted October 26, 2006 Report Posted October 26, 2006 Must be one of them diesel shee's... :laugh: Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.