idles perfect but bogs on all gears when gased

[tmac20031]

I rode my bike and it ran perfect, I turned it off for a little while(maybe 5 minutes) then I hopped back on and it cranked back up. It idled perfectly fine but when I hit the throttle it went blahhhhhhh and it does it threw all gears(it bogs). I have used the search option and I have found similar topics but I have some questions too. By looking at other comments Im thinking it might be the e-brake. (BUT). My e-brake has been disconnected manually because my hand gaurds couldnt be put on because engager was in the way. Is there an electrical connection that I have to disengage as well. I just would like a straight answer of what it is that has gone wrong with the bike given these exact circumstances that the bike is showing. I know that there are alot of banshee genieses on here that know alot, so I would appreciate it if u guys would take a little time and a little typing to help me out. THANKS. :biggrin:

[96dragbanshee]

get rid of the TORS. Next change the plugs they could be fouled. Drain gas if this doesnt help sounds like your too rich. your jets may not be the right size give us your location and we could help you out.

[addicted]

I rode my bike and it ran perfect, I turned it off for a little while(maybe 5 minutes) then I hopped back on and it cranked back up. It idled perfectly fine but when I hit the throttle it went blahhhhhhh and it does it threw all gears(it bogs). I have used the search option and I have found similar topics but I have some questions too. By looking at other comments Im thinking it might be the e-brake. (BUT). My e-brake has been disconnected manually because my hand gaurds couldnt be put on because engager was in the way. Is there an electrical connection that I have to disengage as well. I just would like a straight answer of what it is that has gone wrong with the bike given these exact circumstances that the bike is showing. I know that there are alot of banshee genieses on here that know alot, so I would appreciate it if u guys would take a little time and a little typing to help me out. THANKS. :biggrin:

There is a switch that is connected to the perch, right where the e-brake cable was connected. that switch must be closed or your bike will act as you have described. I just cut the two wires down ubder the tank and spliced them together with a water tight connection. Hopefully this is your problem.

[tmac20031]

Im thinking its between the Tors and the e-brake because It has ran fine in this location for two years and this problem just happened suddenly. But I like all the suggestions I can get because Im making a checklist so that I am perpared to fix the problem the first time.

[TeamBigginRacing]

E-BREAK!!!!!!!!!!!!!!!!!!!!!!99%

[00tbanshee]

E-BREAK!!!!!!!!!!!!!!!!!!!!!!99%

i agree. did it before

[cheezehead69]

i agree. did it before

 

 

if it isent the e brake check your electrical connetions to the coil and the plugs. that what my problem was just a loose connection.