Slayer1018 Posted April 11, 2006 Report Share Posted April 11, 2006 They are only $258 on their online store Quote Link to comment Share on other sites More sharing options...
ellison445 Posted April 11, 2006 Report Share Posted April 11, 2006 you have any porting done yet? Quote Link to comment Share on other sites More sharing options...
Slayer1018 Posted April 11, 2006 Author Report Share Posted April 11, 2006 No... Why? Quote Link to comment Share on other sites More sharing options...
ellison445 Posted April 11, 2006 Report Share Posted April 11, 2006 Because for 50 bucks more you could get a port job and Have a huge difference in power V force are great reeds, but you will see more from porting Quote Link to comment Share on other sites More sharing options...
odaen Posted April 11, 2006 Report Share Posted April 11, 2006 Porting will run you another $200 once you throw in the new pistons and gaskets, but if you have those funds available, I'd highly recommend it. You will have a completely different motor. You can get those reeds for under $200 if you buy them off ebay. Quote Link to comment Share on other sites More sharing options...
ellison445 Posted April 11, 2006 Report Share Posted April 11, 2006 Correction Odaen Another 50 bucks http://www.bansheehq.com/forums/index.php?...topic=59101&hl= Porting will run you another $200 once you throw in the new pistons and gaskets, but if you have those funds available, I'd highly recommend it. You will have a completely different motor.You can get those reeds for under $200 if you buy them off ebay. 500462[/snapback] Quote Link to comment Share on other sites More sharing options...
bansheeryder_69 Posted April 11, 2006 Report Share Posted April 11, 2006 if you have the funds definitely get the porting Quote Link to comment Share on other sites More sharing options...
Hilarious Posted April 11, 2006 Report Share Posted April 11, 2006 (edited) Porting, 4mil stroker crank and bigger carburetors. Drain yer wallet and fill yer need fer speed. When I put those reed cages on my bike, I honestly couldnt tell much of a difference. The throttle response is a bit crisper though. Edited April 11, 2006 by Hilarious Quote Link to comment Share on other sites More sharing options...
lowriderb Posted April 11, 2006 Report Share Posted April 11, 2006 i would just get some tdr reeds over the v force, ive been running them in the stock cages for a good while now and havent broken but one set in 2 1/2-3 years.. 30 bucks and then ported stock cages.. you cant beat the price Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted April 12, 2006 Report Share Posted April 12, 2006 FAST can get u them for less than that price..give jeff a call at 1-785-364-5325 Quote Link to comment Share on other sites More sharing options...
Wicked98Shee Posted April 12, 2006 Report Share Posted April 12, 2006 (edited) the vforce have 2x the petal area that the tdr on stock cages have. more petal area means better atomization/flow and throttle response. just food for thought! Edited April 12, 2006 by Wicked98Shee Quote Link to comment Share on other sites More sharing options...
lowriderb Posted April 13, 2006 Report Share Posted April 13, 2006 you also have 2x's the pain in the ass because of peddles breaking or just fracturing.. but hey, some of the fastest bikes ive seen didnt run pvl's or vforce reeds.. they ran the stock units just modified for the bike..timing plate, ported cages ect.. Quote Link to comment Share on other sites More sharing options...
Slayer1018 Posted April 13, 2006 Author Report Share Posted April 13, 2006 Thanks Loco, I will give them a call... Quote Link to comment Share on other sites More sharing options...
race-a-holic Posted April 14, 2006 Report Share Posted April 14, 2006 I've been using v-force reeds for about 3 years.I've used them when I was burning gas and even when I switched to alcohol with no problems. Quote Link to comment Share on other sites More sharing options...
lowriderb Posted April 14, 2006 Report Share Posted April 14, 2006 race: your deffinitly one of the few that ive heard of that hasnt broken any of the carbon reeds from vforce.. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.