jmurrayR6 Posted February 24, 2006 Report Posted February 24, 2006 I Finally Figured out why mine would not work. Check everything but the reeds. I had 2 reeds missing. Everything is fine though. Case close with my cilnder. thx god Quote
blackandyellowshee Posted February 24, 2006 Author Report Posted February 24, 2006 They were missing? as in you didn't put them back in, or as in they just dissapeared Quote
jmurrayR6 Posted February 24, 2006 Report Posted February 24, 2006 Bought the bike with a motor just rebuilt which it was. It was built by top dog in portland our something. Some dumb mech. riged the reeds together one side had bosyen and other stock also they drilled into the reeds rigging them together poped one of the reeds through but it did no damage luckly. Most the reason why it did no damage is because i could only make it run for about 2 secs. but just ran to salem and found a guy selling a newer stock cage with new bosyens in it for $20 bones. Now ill I need is some manifolds. PM me if anyone has some Quote
blackandyellowshee Posted February 25, 2006 Author Report Posted February 25, 2006 Took off the carbs and there is motor oil in them!! Does anyone know how this could have possibly happened I know it is motor oil, and I know I could not have mixed tranny oil into my gas for a FACT, because I had no tranny oil handy, only castor... My airfilter is really dirty, but I am just cleaning it now so I will see if that helps. My thoughts were maybe it couldn't suck from the airfilter, so it sucked from somewhere else, and that would be the tranny? Is there a breather hose or something that it could have sucked out of? thanks... Quote
daryn c Posted February 25, 2006 Report Posted February 25, 2006 (edited) did you mix your gas before you put it in the tank??.. im sure you did . just makin sure ... some idiot put regular gas in his yz85 the other week .. and .. BOOM! no compression bla bla bla i would get new spark plugs to be on the safe side ...also i would use regular yamalube 2R with chevron 93 ..ohh yeah... and clean your carbs if its not to much trouble!! ... make sure your top end is tourqed on tight! Edited February 25, 2006 by daryn c Quote
blackandyellowshee Posted February 26, 2006 Author Report Posted February 26, 2006 My gas IS mixed and I put new spark plugs in with no difference. Quote
g-unit Posted February 27, 2006 Report Posted February 27, 2006 Why don't you get your brother to look at it . I heard he's some sort of a genius, and good with the ladies too. Quote
Wicked98Shee Posted February 27, 2006 Report Posted February 27, 2006 you pretty much have got to have the right crank seal or a case gasket leaking if you are positive that your fuel is mixed properly, there is no way you should be getting trans oil like that. take it back where ya bought it and make em fix it right, it's still under warranty isn't it???? Quote
blackandyellowshee Posted February 27, 2006 Author Report Posted February 27, 2006 (edited) Why don't you get your brother to look at it . Edited February 28, 2006 by blackandyellowshee Quote
Turbobanshee_kid Posted February 28, 2006 Report Posted February 28, 2006 I know what the problem is it is the parking brake!!!!!!!!!! Quote
blackandyellowshee Posted February 28, 2006 Author Report Posted February 28, 2006 Now it won't run at all! We dumped gas down the cylinder and it runs, and there IS gas going into the carb, so maybe G needs to come over again and help take off those carbs Maybe stuck reeds or something? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.