BrianEb Posted January 13, 2006 Report Posted January 13, 2006 I was just wondering if anybody is running this set-up Toomey T-6 Pipes Toomey 2-IN-1 filter V3 Reeds Stock carbs Cool Head Right now I'm running 260 mains with the clip in the middle, V3 reeds and I believe the pilots are stock. I just put on a Vito's hemi head with 21cc domes and I also want to put on the Toomey 2-in-1 filter. I was just wondering if I will be safe with the 260 mains as they are now. I live in Michigan whch is about 1000ft. above sea level Quote
PUSH THE THROTTLE Posted January 13, 2006 Report Posted January 13, 2006 I don't have that setup but with aftermarket pipes, reeds, and filter I'd think you'd be bigger. Check the jetting FAQ http://www.dfn.com/benkaren/jetfaq.html Quote
ellison445 Posted January 13, 2006 Report Posted January 13, 2006 I would bump your main upto a 300 and rejet from there. Once you ditch that airbox it going to change your jetting ALOT!! I have almost the same setup and Im at 280 Toomey T-5 Pipes Toomey 2-IN-1 filter V2 Reeds Stock carbs Cool Head ( Noss head 20cc domes) Quote
BrianEb Posted January 13, 2006 Author Report Posted January 13, 2006 Thanks alot I'll try that I know that when I changed to V3 reeds I had to go from 280 down to 260 mains Quote
gatoman28 Posted January 17, 2006 Report Posted January 17, 2006 I'm running the Toomey pipes myself, I was told to go up to a 320 main jet and 27.5 pilot jet. T6 stock carbs-mikuni KN Filters clamp on - one to each carb no cool head I still have to do my rejetting also. Quote
Banchetta Posted January 17, 2006 Report Posted January 17, 2006 You guys are either up there in elevation or just running lean.....start w/ 350 mains, needle 4th clip, stock pilots. Quote
Hairfarmer Posted January 19, 2006 Report Posted January 19, 2006 I'm running t5's stock head, with cut up air box at 1200 ft, about 40 degrees. I"m jetted at 310 main, 25 pilot and third clip on the needle. Runs nice for the temp. We were out this weekend Hair Quote
Banshee~ Posted January 19, 2006 Report Posted January 19, 2006 You guys are either up there in elevation or just running lean.....start w/ 350 mains, needle 4th clip, stock pilots. 460940[/snapback] Exactly, nothing lower than a 350 with those mods at you temp. Im at a 340 with 40 degree weather at 1000ft. (pipes and clamp on filters). Quote
banshee223 Posted January 19, 2006 Report Posted January 19, 2006 (edited) I'm in oklahoma and I have k&n clamp ons, toomey t5s and boyesen pro series reeeds and i'm running a 300 main, don't remember what the clip on the needle is at but I'm running a little rich Edited January 19, 2006 by banshee223 Quote
sredish Posted January 21, 2006 Report Posted January 21, 2006 I was going to say start at 320, I just have a hard time believing that the stock ports need more than that. 260 does sound lean. Quote
Shee-Male Posted January 21, 2006 Report Posted January 21, 2006 from 280 down to a 260 with reeds ???????? Your gonna squeak that motor! start at LEAST a 320! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.