decon Posted January 11, 2006 Report Share Posted January 11, 2006 my uncle is lookin for more torque and low-mid power out of his banshee, he has fattys and a k&n. I told him porting would change the power curve to what he wanted exactly, but looking for other opinions. we ride open mountain trails. Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted January 11, 2006 Report Share Posted January 11, 2006 yep he needs to talk to a builder and have some porting done. Quote Link to comment Share on other sites More sharing options...
Wallrat Posted January 12, 2006 Report Share Posted January 12, 2006 Only other options besides porting that will give more power down low that I can think of are: pipes (2:1, pt mids, etc) single carb porting timing advance more compression Quote Link to comment Share on other sites More sharing options...
decon Posted January 12, 2006 Author Report Share Posted January 12, 2006 ^hmm I had forgot about the 2 in 1 carb setup Quote Link to comment Share on other sites More sharing options...
thegroup Posted January 12, 2006 Report Share Posted January 12, 2006 trinitys got the 2:1 carb. def worth it Quote Link to comment Share on other sites More sharing options...
Banchetta Posted January 12, 2006 Report Share Posted January 12, 2006 Only other options besides porting that will give more power down low that I can think of are: pipes (2:1, pt mids, etc) single carb porting timing advance more compression 458274[/snapback] I think wallrat pretty much nailed it...you already know how the pt mids go. Does he have a cool head or NOSS head? Timing is good for 2hp across the whole curve..Dan @Patriot makes one hell of a mean low end stroker....JKJK's shee has instant throttle like the Pt mids have w/ incredible pull, but smooth. Depends how much money he wants to dish....... Quote Link to comment Share on other sites More sharing options...
decon Posted January 12, 2006 Author Report Share Posted January 12, 2006 he's got a stock head. he was real into the porting when I was talking to him, but i'm not sure. he likes the pipes he has but from what he's telling me is he wants more low end/torque. I told him about eric gorr's port, but i'm not sure how it runs with fattys. Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted January 12, 2006 Report Share Posted January 12, 2006 he's got a stock head. he was real into the porting when I was talking to him, but i'm not sure. he likes the pipes he has but from what he's telling me is he wants more low end/torque. I told him about eric gorr's port, but i'm not sure how it runs with fattys. 458307[/snapback] im sure the gorr woods port will respond excellent to those pipes. he will notice a huge difference. Quote Link to comment Share on other sites More sharing options...
banshee tuner Posted January 12, 2006 Report Share Posted January 12, 2006 Have him get his head milled to start with, a cheap mod and makes a good bit of difference. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.