Need Engine Builder

[jeepman380]

FAST

[rocketboy]

passionre is very knowledgable

[decon]

of course your going to get a whole bunch of different answers, call each builder , talk to them, and see which one you would prefer

[blueshee03]

yeah right, I have raced passion bikes and fast racing, yeah they are cool if you are not into going fast,

432553[/snapback]

 

lmao,you know they probally had inexperienced kids riding them also .i'm sure passion aint going to win every race but then neither is fast,rdz,port magic,grr and the list goes on.i will say however its pretty pathetic when a 4mil on gas walks all over a triple exhaust port on alky.especially when its a small bore 4 mil 500 dollar port job on gas against a big bore stroker,1500 dollar port job running alky.now that just didnt impress me.

Edited November 3, 2005 by blueshee03

[bkabina]

RDZ can make you go real fast, all the rest of those guys suck

432541[/snapback]

 

 

yeah right, I have raced passion bikes and fast racing, yeah they are cool if you are not into going fast,

432553[/snapback]

 

You are just so confident.Where you located?

[hamuel]

louie at twister will set yah all straight..... And thats all there is 2 it

[dajogejr]

I personally saw badassbanshee479's cub motor, 4 mil drag port stroker on gas run at Silver Lake this weekend.

Built by Jeff @ Fast.

I'm not saying Passion, A&S, Patriot, etc. don't build good motors, they surely do.

 

But, JT's bike was flat out impressive....period.

 

I've never talked to the other guys, either. But, I bought my clutch from Jeff, and I'll say it here again. The customer service he gave me was like I bought a 3K motor from him, not a 90 dollar clutch.

 

I don't feel the need to talk to anyone else. FAST gets my vote...

[Justintoxicated]

Passion, Patriot and GRR, and A&S is who I would look into talking to.

Edited November 3, 2005 by Justintoxicated

[suzuki0702]

haha, we outta do a little bidding here..whoever can do it cheapest, and cleanest gets the job! bidding starts at passionRE!

[odaen]

Someone mentioned Patriot, and I'd concur with that. Cameron at Redline Racing is top notch too. He's done both of my motors, and will do the 3rd if there is one.

[blueshee03]

haha, we outta do a little bidding here..whoever can do it cheapest, and cleanest gets the job! bidding starts at passionRE!

433277[/snapback]

 

 

passion racing's prices and quality of workmanship are are very hard to beat!!!!!

[Yamaha_Banshee_Rider]

I am going with passion

[blackstallion]

I also want to keep the engine black if possible to create a sleeper look.

431259[/snapback]

 

black vht high temp spray paint does wonders on cheetah cylinders to keep that sleeper look. i painted my cubs all black and it took about 3 races a week for 2 months for someone to figure out that i had cubs on there and not stock jugs ya i took alota money

[dajogejr]

Was thinking about doing just that myself....

 

Although...they should've figured it out when you pulled 3 bikes out of the whole and kept pulling like a frieght train...they were probably looking for the bottle when they discovered the cubs...

 

 

[sheefreak]

This is a bad time of the year to get to be picky w/builders. They are all busy.