Why are drag pipes usually out of frame?

[01bansheefox]

Why are these drag banshee pipes out of frame with no silencers or anything? Just wondering the +side of this?

[NYUK]

silencers will hold in heat.

[Cotton eyed Joe]

silencers will hold in heat.

421974[/snapback]

And, anytime you have a heated gas, you have higher pressures, which is the opposite effect you want with a drag pipe. You need lower pipe pressures to better facillitate scavenging.

[NYUK]

and they look bad assed.

[taldoc3]

to make people put their hands over their ears

[01bansheefox]

And what about those drag pipes with silencers at the end?

[[email protected]]

to make people put their hands over their ears

421980[/snapback]

 

 

And what about those drag pipes with silencers at the end?

422002[/snapback]

 

 

drag pipes make people go DAMN thats bad ass lol , and yes they make people go shhh loud .

 

[01bansheefox]

Is it ok to ride around on drag pipes if your out at the dunes or are they used just for the race here and there.

[[email protected]]

i ride drag pipes like inframes and have no problem with it , i do alot of " trails " and what not , alot of NON dragging and top end runs down the highways lol . there good but if u ride where theres TONS of tree's and have little cleareance on each side avoid it ! Miami is flat and very smooth thats why i run outframes VERY little obstacles

[race-a-holic]

People might like out of frame drag pipes maybe because they enjoy hearing loss?I like in-frames myself.Not saying I'll never go to out of frames,but it's very cool beating them with in-frames when I can.

[RIPPEN]

drag pipes make people go DAMN thats bad ass lol , and yes they make people go shhh loud .

 

422124[/snapback]

 

Yeah thats what I thought too untill I saw a few with out frames run like shit while making a ton of noise .

RIPPEN

[race-a-holic]

I second that.I once beat a guy that had a banshee with a drag frame and out of frame pipes.It looked fast sitting there,but not when I beat him.Then again maybe he was flying when I passed him.LOL!

[locogato11283]

if u have outframes you better be fast...

[[email protected]]

i have not lost a banshee race in my area , and i ran about 7 so far . some people i know some people i do not know . most had medium amounts of work done . not saying you guys wont beat me , im just comparin me to local's .

 

get whatever type of pipes you want .

[bigboybanshee]

get whatever type of pipes you want .

422767[/snapback]

 

I agree...especially when you have to buy something else because the maker/seller of the pipe you want is ripping people off left and right.

 

There are not a whole lot of options for inframe drag pipes...