Bansh88 Posted August 20, 2005 Report Posted August 20, 2005 I want to check these to make sure the reeds are in good shape. They seem to be stuck on pretty good. Before I start prying with a screwdriver, I want to make sure there is no trcik to pulling these off. Quote
RNBRAD Posted August 20, 2005 Report Posted August 20, 2005 Just tap them with a rubber mallet, should come right out. Quote
NYCBanshee7 Posted August 20, 2005 Report Posted August 20, 2005 How long have you had them. I had mine for about 3 years, and i checked them and they are perfectly fine. Just my 2 cents before you take them out. Quote
FIRST BANSHEE Posted August 20, 2005 Report Posted August 20, 2005 I want to check these to make sure the reeds are in good shape. They seem to be stuck on pretty good. Before I start prying with a screwdriver, I want to make sure there is no trcik to pulling these off. 406614[/snapback] the center part pulls right out Quote
Toomey Banshee Posted August 20, 2005 Report Posted August 20, 2005 try not to rip that shitty paper gasket before the reed blocks. Quote
Banshee 79 Posted August 21, 2005 Report Posted August 21, 2005 air chisel... 406634[/snapback] Quote
MonkeyBoy Posted August 21, 2005 Report Posted August 21, 2005 While you have them off replace the gaskets with new factory gaskets. They are less than a dollar a piece. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.