coolant bottle relocation

[crbanshee]

what im trying to find out is where does the hose that comes out from the radiator cap (over flow hose) mount on the coolant bottle??? i relocated the bottle to the fromt of the bike to accept toomeys..does it go to the bottom of the bottle or the top??? and what is the best way to re route the hoses after i mount the bottle

[superchicken]

the small hose runs to the bottom of the bottle.the top hose is an overflow.i geuss you can run the hose down the back of the rdiator to the bottle and the overflow down the frame about a foot

[01bansheeke]

you should just ditch that coolant bottle. you don't really need it, JMO I ran my overflow straight down to the ground. I can see it if its coming out. Why did you need to move the bottle to accept toomeys? i didn't have to move myne when i still had it

[crbanshee]

the stupid toomey instruction kit told me i needed to put the new breather holes in the air box right where the coolant bottle is..i later found out after doing that that its not needed..so now im stuck with the bottle in the front

[locogato11283]

just ditch the bottle man. its not needed. run the overflow straight to the ground.

[SICK BOY]

just ditch the bottle man. its not needed. run the overflow straight to the ground.

366523[/snapback]

 

That's what I did.

[yodamonkey64]

can u really do that? remove the bottle. the one that mounts behind and below the seat? that would be really nice cause i dont like the look of mine? any help would be great. also. where do u guys get the art work done of ur shees and the girls together. i think those look really tight and was gonna look into somethin like that. thanks guys. ride hard

 

Justin