Proquad101 Posted April 15, 2005 Report Posted April 15, 2005 yes, but that frame can have features right? like 250r geometry? 355700[/snapback] Yes you would have to change the geometry of the frame, my frame is about 30lbs. lighter than a stock frame and it handles no different than a stock frame does. Quote
ledofthezep Posted April 15, 2005 Report Posted April 15, 2005 I would change the frame and suspension/frame to handle like the 400ex. I would also make the motor come stock with power valves. 355543[/snapback] Hell yeah! Also throw a round-house carrier swingarm on there, and a different air-box/filter setup from the factory. Quote
BenBB Posted April 15, 2005 Report Posted April 15, 2005 I'd also like the power valves and fuel injection. Bring the 2 stroke technology up to date so it could pass emission laws 355542[/snapback] Yeah if it was just one thing...tweak the motor just enough to keep buildin' 'em. Of course if it was a wish list, like everyone else said; completely redisigned airbox/filter setup, round housing swingarm, front suspension geometry (hell the YFZ is close enough heh), aluminum frame would be sick, and since we're throwin' in PV's and EFI, an updated electrical system... Quote
DUNEDEMON Posted April 15, 2005 Report Posted April 15, 2005 Just one thing? Hands down a light weight high strength aluminum frame. 355622[/snapback] Must you polish everyting Brad? Chalk up another vote for a frame designed around better front suspension geometry. Quote
odaen Posted April 15, 2005 Report Posted April 15, 2005 myself, i'd go for another cylinder who needs geometry in the sand? Quote
ledofthezep Posted April 15, 2005 Report Posted April 15, 2005 Hell why not just take a damn yfz & throw a banshee motor in it! Quote
redcell43 Posted April 15, 2005 Report Posted April 15, 2005 Hell why not just take a damn yfz & throw a banshee motor in it! 355774[/snapback] i think i found my next project Quote
RNBRAD Posted April 15, 2005 Report Posted April 15, 2005 Must you polish everyting Brad? Chalk up another vote for a frame designed around better front suspension geometry. 355746[/snapback] Well ummm, I thought hey, if we do a different geometry frame, lets do it out of aluminum. It's lighter and stronger and yea you can polish it, never thought about polishing it though. Ok you caught me. Quote
rjvoight Posted April 15, 2005 Report Posted April 15, 2005 suspension, hands down. I have learned to ride the banshee with the frame it has now, if I could only get it to take up some of the hits better, I would be in heaven. RJV Quote
decon Posted April 15, 2005 Report Posted April 15, 2005 i agree with the frame and suspension. 250r handling + twin motor = ultimate machine Quote
glamisrider90 Posted April 15, 2005 Report Posted April 15, 2005 i would have it come stock whith a pink powerband and a BOOSTBOTTLE!! Quote
. Posted April 15, 2005 Report Posted April 15, 2005 yamaha needs to take the yfz jigs.....open them up a little bit in the engine compartment....and start selling them with shee engines in them. It wouldnt cost a lot of money......and they'd sell like hotcakes. Quote
rebelbanshee2 Posted April 16, 2005 Report Posted April 16, 2005 just one thing...pick one from the list A front end geometry that works A frame made out of good steel a real chain adjustment system 48" wide shocks that absorb shock an engine that wasnt designed 30 years ago a real air box setup real tires twist throttle thats good for now.. Quote
CowboyBanshee Posted April 16, 2005 Report Posted April 16, 2005 I concur, suspension is a big must....powervalves would be nice....screw efi... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.