my new -2 swinger

[H250RHATER]

just got my -2 yesterday and now that im looking at it theres no brake line holder

do they make aftermarket holders like for the front brake line on the a-arms

 

but any way here she is -2 swinger

[RNBRAD]

Probably just have to use a zip-tie. Tucker pro-arm is the only one i've ever seen that offers a clamp style set-up such as those for a-arms.

[Proquad101]

I have a ls -3.5 and I zip tied mine to the frame. Be sure that you leave enough slack in it so that doesnt get pulled to hard when your swing-arm moves.

[stu]

i used zip ties and there still going strong after 2 years

[Blue Duece]

you can use an after market billit clamp, put a little jbweld on it and clamp it to the top rail of the swinger, when it dries you cant break it free if you tried, glueing two of them about 8 inches apart looks cool with a braided line

[ledofthezep]

I just made mine loop a bit...see....

 

[locogato11283]

zip ties...

[Proquad101]

Brakes are way over rated, just disconnect the line and go ride.

[wesw]

Brakes are way over rated, just disconnect the line and go ride.

355163[/snapback]

 

 

 

thats funny

[mxbanshee]

I don't put anything on my quad that make me go slow... HA HA HA...

[H250RHATER]

thanks guys looks like im just gonna use zip ties untill i ride it for a while

 

by the way only thing i can say is get ready to ride the back bumper

 

just got done ill post a pic of it in a little

[Cotton eyed Joe]

Probably just have to use a zip-tie. Tucker pro-arm is the only one i've ever seen that offers a clamp style set-up such as those for a-arms.

355020[/snapback]

Mine will in about 2 weeks.

[H250RHATER]

side

 

rear

 

old POS

 

look at that crack

o well

 

the new one is nice and she stands up easy as shit i can feal the power difference with the -2 its definatly got tons more of a tourky feeling cant wait to race it