rujones10 Posted February 2, 2005 Report Posted February 2, 2005 alright heres my problem i went riding this last weekend and my bike started backfiring hella ugly so i check it out and teh plate that hodls teh filter on in my airbox wasnt sealed properly and it sucked sand into my carbs by teh way i have a unifilter with no airbox lid on a 2004 banshee i have t-5s .and jetted for sea level ok anyways i took the carbs apart today and clened them out put it vack together and it finally started running after we pulled started it with a truck and it still ran like shit now it making a noise to me it kinda sounds like tapping valves on a car. so if anyone might now whats wrong i would greatly appreciate the help Quote
runsstrong Posted February 2, 2005 Report Posted February 2, 2005 sounds like you sucked some dirt in the motor i would tear it down before you do more damage Quote
SuperChris Posted February 2, 2005 Report Posted February 2, 2005 Don't run it any more. You have got sand in your motor, most likely in all your bearings and between the piston and cylinder. That rattling noise is very bad. The Banshee is by far one of the easyest two stroke wheeler or bike motors to rebuild, so get on with it! Quote
rujones10 Posted February 3, 2005 Author Report Posted February 3, 2005 ok i checked the compression and it 30 on the left and 50 on the right i pretty sure thats bad does anyone know what its supposed to be Quote
ssanddemon Posted February 3, 2005 Report Posted February 3, 2005 It's bad/you're screwed. Sorry, there's no easy way to put it; start the teardown. Quote
GYTWYPT Posted February 7, 2005 Report Posted February 7, 2005 Yeah i am thinking it should be like a 130 unless its like mine then it should be about 230 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.