Jump to content

Pro Circuits


Doodle

Recommended Posts

I'm getting some Pro Circuits for my bike which is all stock except for a K&N. I'm at 3100' elevation and I was wondering if starting with a 280 main jet would be a good start. Do you usually have to go up to a 27.5 pilot or should I see how it runs first with a 280 main and stock pilot first. Also, would it make much difference running without the airbox lid or not? Any info appreciated.

Link to comment
Share on other sites

You might be too rich w/ a 280 main. I'd start w/ a 270 main, 27.5 or 30 pilot and go from there...removing the air box lid will make a huge difference. Or you can cut the last 1.5" off the end of the lid so you still have all 4 clips to hold it on.....make sure you adjust your needle. ;)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...