Fender Fix

[Nighty]

Eventually every blue banshee out there will start to develop white marks from sagging or rolling the banshee.

 

Is there a way to get the white marks out?

[frocashmoney24]

heat gun, or some new plastics, or repainting

[locogato11283]

use a propane torch and lightly go over the white marks. dont get too close. start far away and work with it until you get good at it. it will take most of the white out. DO NOT use an actylene torch. it will melt your plastic.

[pimp559]

You can also use the wifes hair dryer. Its a little more forgiving than a torch incase you get too close.

[Nighty]

Thanks guys!

 

We have a paint burner (kinda like an advanced hair dryer),

Ill try that.

 

So the fenders will turn blue again if you heat them up?

 

Ps: did a cam modification tonight on a yfz450.. i cannot believe how good those things run.. really beserk.. i want one.

oh the cam mod was hmm not to impressive might change with yetting.

[sredish]

the cam mod was hmm not to impressive might change with yetting.

i don't know how well that will help, you probably should just start with the jetting.

 

 

such a smartass.

[Nighty]

Hehehe i should come over,

to run you over,

with that nice jeep in your sig

 

No hard feelings have a beer

[tenn banshee]

a heat gun will take some of the stress marks out, just dont hold it in one place too long.

[evil]

just cut your fenders so you dont get those stress marks ohh and the heat trick works a few times, then if it happens again the blue wont come back as easy.

[Nighty]

 

All stress marks gone!

That heat trick works great!

 

Thanks

[Nighty]

ohyeah and the rejetted yfz450 now really REALLY does whoop ass.