Popping Out Right Side

[MotulMonsta]

Air leak in the exhaust. Did you put those o-rings in the pipes before you put em on? Plugs look good right? You might not have a good seal.

[Banshee~]

I think its something wrong with your pipes?

[@@banshee_rider@@]

put on nu plugs or clean them with gas if you dont have a shop nearby.

 

it always happen to me in the dunes.

[MADMOOSE]

so ur only runnign one larger carb..i would check for carbon buildup inthe ports....

[FORMULASPEED]

Are you running the Orings for that intake?

If so that maybe the problem.

When I had mine I used regular intake gaskets.

Then I had rebuilt my motor and onlly had one set of gaskets.

so I used those and the orings and less than1 hr on my new motor

it blew up on the left side. . Yes my intakes where tight.

So I blamed the problem on them. Put new piston in it, put my stock intakes back

on and carbs. No problems yet. Infact I like it better

The trinity seemed to run flat at wot. And I diddnt see that much

bottomend loss. When I put it on I put other stuff on to so I didnt know how much it helped. Until I went back stock, and I like the duals. The water sux wit stock carbs so Ill be going to flatslide 28s soon.

Hope this helps.

[cheezehead]

Going to try a new o ring in the exhaust today I know I don't have an intake leak sprayed it with carb cleaner and it didn't make a diff to the revs. Will let ya'll know what I find out

[cheezehead]

Well the oring seemed to be it just have to get my jetting figured out Thanks all

[FORMULASPEED]

The oring on what the pipes or the intake? were is you jetting at now?

[cheezehead]

o rings on the pipe this is a custom intake right now I'm running a custom 2 into1 with a 38mm 480 pilot.