ruff_rida69 Posted January 14, 2004 Report Posted January 14, 2004 hey, anyone know the stock bore size for a rz350? or do they know what .75mm bore size is? i found some and they say that there .75mm and i was wondering how much they've been bored, Thanks, Jonathan Quote
ruff_rida69 Posted January 14, 2004 Author Report Posted January 14, 2004 I thought stock bore was 64.00mm? thats what all the websites about rz350's I'v found say, do you know where i could find pistons that big? all the sites iv found go from 64.00mm to 66.50mm on rz's Quote
boonman Posted January 14, 2004 Report Posted January 14, 2004 Stock bore-64mm + .75mm=64.75mm What more do you need? I don't understand what you are after here??? ANyone that deals with Wiseco pistons should be able to help you out... Quote
ruff_rida69 Posted January 14, 2004 Author Report Posted January 14, 2004 hes says that the bore size of the cylinders are 75.00mm, which i e-mailed him about it just to make sure he didn't make a typing mistake, but he hasn't repleyed yet, I think he ment to type 65.00mm instead of 75.00mm. Thanks, Jonathan Quote
boonman Posted January 14, 2004 Report Posted January 14, 2004 Ohhhhhhhh. In your fist post you have .75mm not 75mm. BIG difference!!!! lmao!! Quote
shortys racing Posted January 14, 2004 Report Posted January 14, 2004 hes says that the bore size of the cylinders are 75.00mm, which i e-mailed him about it just to make sure he didn't make a typing mistake, but he hasn't repleyed yet, I think he ment to type 65.00mm instead of 75.00mm. Thanks, Jonathan I would find out befor eyou buy....65mm and 75mm is alot of difference. You can fit a 75mm but the transfers would be small as hell....... Quote
Nighty Posted January 14, 2004 Report Posted January 14, 2004 I have a banshee prox piston and it wont even slide in the rz cilinder.. go figure. the prox piston is .30. the rz is compleetly stock. Quote
Nighty Posted January 14, 2004 Report Posted January 14, 2004 so simply said the rz cilinder is not bigger then a banshee cilinder. + The wiseco piston catalogue lists rd/rz 350 and banshee with the same pistons. Quote
boonman Posted January 14, 2004 Report Posted January 14, 2004 The RZ and banshee bore sizes are the same. Also, Ruff, I know what auction you are talking about. 'Tis right HERE And they are just bored .030" from his writeup. Quote
Aussie Quad Racer Posted January 14, 2004 Report Posted January 14, 2004 there is no way in hell you will get rz cylinders to 75mm!!! The powervalve setup just wont allow it let alone the cylinders themselves Quote
ruff_rida69 Posted January 14, 2004 Author Report Posted January 14, 2004 yea boonman thats the set-up im lookin at, if i can get the money in a week, but I think its just bored .30 over like you said, so hopfully i can come up with the money in a couple days and I'll have a rz-shee! Thanks everyone for all your repleys. Thanks, Jonathan Quote
Meat Posted January 15, 2004 Report Posted January 15, 2004 He says right in the auction descriptoin Cylinders are currently at .75mm (.060") and could probably use a bore job. Never been ported. Check out this link..... http://www.thebansheezone.com/Bansheezone/CylinderChart.htm Quote
ruff_rida69 Posted January 15, 2004 Author Report Posted January 15, 2004 well he changed the auction info after he e-mailed me this about the cylinders, The cylinders are currently .75mm over (.060") making the bore size 64.75mm. and this is what he said when i asked him if the rz stator and flywheel came with the kit, The Banshee stator and flywheel are identical to those of the RZ He's not too smart if you ask me, but I'll probey buy it any way because I've been wanting to do an rz conversion for a long time, Thanks for all the help, Jonathan Quote
Aussie Quad Racer Posted January 15, 2004 Report Posted January 15, 2004 .75mm and 0.060 are different measurments. Better get him to decide which one it is. The stator and flywheels are different from banshee to rz. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.