johnautobus Posted December 16, 2003 Report Posted December 16, 2003 could someone give me a jet size to start out with for a trinity 2 int 1 setup. Motor is stock with fmf pipes. Ride at sea level in dunes. carb now has 180 main , 62 pilot, air screw out 1 3/4, needle del on 2 from top groove.Is this even close? I want to take some jets with me so I can set it up at the dunes. Please help if anyone has done this. k and n filter with outwear. Wiseco pistons ,1 st oversize. Quote
itsmyforte Posted December 16, 2003 Report Posted December 16, 2003 62 pilot WTF? i would call trinity or who ever made your 2 into one manifold carb setup and ask them. they will get you in the ballpark. Quote
brock_fuzzy_69 Posted December 16, 2003 Report Posted December 16, 2003 well i know that when i got my machine it has the trinity 2 into 1 intake and trinity pipes on it it was abou 70-80 degrees at the tiem and it was jetted with a 48 pilot and a 155 main and the needle was the second ring up fromt he bottom not sure jsut wich needle it was that is in there Quote
Leadfoot350 Posted December 17, 2003 Report Posted December 17, 2003 What size carb 33 or 35? For 35's I would go with 48 pilot, 175 main on the third clip with the screw 1.5 turns out. Make sure you have new strong reeds. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.