Wiring question

[Rob88]

I’m building a banshee and was going to do the tors delete. What i was wondering was what wiring do i need for key switch and stock light switch after i float the stator and add a battery? 

[hoppedupandcutdown]

I'd love to help here, but don't really know what you're asking?

[Keno]

Unplug TORS, Buy this and ADD THE IDLE KIT https://www.jdscustoms.com/product/motion-pro-tors-eliminator-kit/  and Buy this https://www.jdscustoms.com/product/jl-engineering-complete-dc-conversion-kit/

[Rob88]

13 hours ago, hoppedupandcutdown said:

I'd love to help here, but don't really know what you're asking?

Well i got rid of the tors. 
i have led lights i want to run. what wiring do i need for stock light switch to work for my led lights. 

[hoppedupandcutdown]

Wire in the new lights to the hi beam wire or the low beam wire or both (yellow and green) and black (ground) of course.

Although don't expect LEDs to last with the Banshees AC current.

Some say they have good look, the vast majority do not.

A DC conversion kit, as linked above, is really the way to go.

[375hp banshees]

^^ And if floated ,all wires at switch, will go to & from battery/ conversion, including ground now...not to OG harness

[Rob88]

8 hours ago, hoppedupandcutdown said:

Wire in the new lights to the hi beam wire or the low beam wire or both (yellow and green) and black (ground) of course.

Although don't expect LEDs to last with the Banshees AC current.

Some say they have good look, the vast majority do not.

A DC conversion kit, as linked above, is really the way to go.

Yea i was going to do the dc conversion with a battery. I appreciate the help. 

[Rob88]

4 hours ago, 375hp banshees said:

^^ And if floated ,all wires at switch, will go to & from battery/ conversion, including ground now...not to OG harness

Hell yea thanks for the info