80 Watt LED headlight bulbs Ok to use?

[turbowrenchhead]

Just took my bike out of storage and I have one bulb burnt out and I'm going riding this weekend. I had 45 watt blue ones in it. They worked ok. I looked on ebay and these 80 watt LED bulbs are close enough to me that I would get them in time. Will they work on a stock housing, wiring? I have the good stator on it. Forget what one it is. But it came recommend on this site. It puts out two 100 watt outputs. I have only one wired to the headlghts. 

[Keno]

post a link to the lights

[turbowrenchhead]

https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F162734049558

[hoppedupandcutdown]

I tried those. They flickered 12 times and fried.

[sleeper06]

Those say dc on the description, you would have to run inline bridge rectifiers which are like 10-15 each . Look up just power semiconductor website and get 100 watt rectifier, they are nice little plug n play units

[turbowrenchhead]

Do you have a link to this website? 

 

[sleeper06]

http://www.galco.com/find/Just-Power-Semiconductors

give then a call to make sure you’re getting what you need 

[turbowrenchhead]

I have the race tech 200 watt stator. I'm only using one of the wires. Should I wire up the second wire with another voltage regulator? How exactly should I go about getting these bulbs to work? 

[sleeper06]

Huh what regulator are you talking about 

[RagunCajun]

https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F162710045956

 

Convert to DC and get a set of those.

[turbowrenchhead]

sleeper06. I'm talking about the stock voltage regulator. I don't know how many watts the stock one can handle. If I have two 80 watt bulbs I would have to utilize both wires coming off of the race tech stator. running trough a voltage regulator and a rectifier and running one to each headlight.