Baileycakes Posted November 7, 2017 Report Posted November 7, 2017 does anyone have any feedback on the boss racing billet pump cover? https://www.ebay.com/itm/BANSHEE-BILLIT-ALUMINUM-WATER-PUMP-COVER-EZ-DRAIN-/311869226761?vxp=mtr&hash=item489cdabf09 Quote
ClaudeMachining Posted November 7, 2017 Report Posted November 7, 2017 Mine is .25 oz ;-) But yes, it's good, with the easy drain plug. Quote
Keno Posted November 7, 2017 Report Posted November 7, 2017 Should work fine. Should allow you to drain your coolant without replacing the gasket. Not much to talk about, lol Quote
Baileycakes Posted November 7, 2017 Author Report Posted November 7, 2017 cool just wanted to make sure it wasn't junk... thanks all Quote
trickedcarbine Posted November 7, 2017 Report Posted November 7, 2017 2 hours ago, Baileycakes said: cool just wanted to make sure it wasn't junk... thanks all Lay a piece of 6-800 sand paper on a mirror, glass, or granite slab and work the sealing side of the part in a figure 8 motion. It'll get rid of their machine marks and ensure a better seal. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.