HP guesstimate?

[allwheelz]

Sorry if this is in the wrong place. Just curious if anyone could give me a ball park on what kind of power my shee is making...4 mil wiseco crank....115 long rod, 64.5 pistons, stage iv polished 2 into 1 intake, sudco carb...not sure of the size off hand, although I did install an eek needle after reading posts on here, 190 main jet, dmc alien pipes, +5 on the timing. Cheap kit as far as electrical goes, online cdi, stator, flywheel, and coil kit. She started life as a 1998...not sure on the sprockets either...

 

[sangheraent]

80

[bigweav81]

Lol, hard to say without more info......38.7hp.

Those cheap electrical parts may bite you on the ass one day.

 

 

 

Sent from my SM-S820L using Tapatalk

[trickedcarbine]

What kind of porting? Is there a spacer to make the crank work, or are the domes in the head cut to take the stroke?

[J-Madd]

40 - 70

[ClaudeMachining]

46.5hp

[rjdgriff]

Mid 40's

 

 

Sent from my iPhone using Tapatalk

[SandSlingerOR]

38

[n2otoofast4u]

34

[guns4children]

Probably closer to 90s in HP. If you sell it make sure you warn people how fast it is and lable it "not for beginners"

[allwheelz]

Its running a thick head gasket to make up the difference, was a real pain in the ass to seal up...lol. Not sure on the porting, she runs pretty healthy though, I figured with the stroker if the porting wasn't matched I would notice there was a problem....maybe not. I'm really not familiar enough with banshees yet. And I was aware of the issues of the crappy electrical choice, but I figured I would give it a shot, vs the price of a factory cdi box. Can't wait to put this thing through its paces. Thanks for the replies fellas, was just curious....Pa coal rider here by the way, just outside of Indiana, pa, if anybody ever wants to go tear it up in the area!!

[trickedcarbine]

Depends how it's set up. Who did the motor work?

[allwheelz]

I bought it this way, but I split the case to install new crank seals and to really inspect everything.....also installed new rings while I had it apart. Madson's Off Road was the original engine builder. It's a pretty small shop up the road from my house. I've spoken with him, and he said he hand picked everything, that it wasn't a kit.

[bigweav81]

So ask them what kind of hp to expect?

 

Sent from my SM-S820L using Tapatalk