01_BlackBitch Posted July 11, 2016 Report Posted July 11, 2016 (edited) Went riding this weekend and all was good until the shee got a little hot (220) then a bit later started making some noise. pulled the clutch cover off. thought the sound may be coming from there but now im leaning towards bigger problems..... any guesses? https://youtu.be/9KDBtB0TNxI https://youtu.be/m1qe0bxTH2k Edited July 11, 2016 by 01_BlackBitch Quote
arena314 Posted July 11, 2016 Report Posted July 11, 2016 what kind of pistons are you running and how long have they been in there? is it riding any differently loss of power or anything? Sent from my SM-G935T using Tapatalk Quote
registered user Posted July 11, 2016 Report Posted July 11, 2016 FFS its knocking like a muther and the crank gear shouldn't turn freely by hand. what brand of pistons might be the least of things to worry about Quote
01_BlackBitch Posted July 11, 2016 Author Report Posted July 11, 2016 Lol it didnt run half Bad Quote
sheerider11 Posted July 11, 2016 Report Posted July 11, 2016 Lol it didnt run half BadWell it always runs good before it breaks. I hate when people tell me that. "It ran good before it broke, so it shouldn't be to bad to fix" Quote
01_BlackBitch Posted July 11, 2016 Author Report Posted July 11, 2016 Well it always runs good before it breaks. I hate when people tell me that. "It ran good before it broke, so it shouldn't be to bad to fix" no thats not what im saying.... It still doesnt run half bad... like no negative effects just a helacious noise Quote
Larry's Shee Posted July 12, 2016 Report Posted July 12, 2016 I sure as fuck wouldn't run it anymore. Something is wrong and about to explode. Fix it BEFORE there's collateral damage. Quote
Bennett131 Posted July 12, 2016 Report Posted July 12, 2016 no thats not what im saying.... It still doesnt run half bad... like no negative effects just a helacious noise Sounds like you're trying to talk yourself out of fixing it or having it fixed. Quote
01_BlackBitch Posted July 12, 2016 Author Report Posted July 12, 2016 Oh no. Dont worry. Top end is coming off friday. Going to start there. Theres to much money in this build just to run it and let it come apart Quote
sheerider11 Posted July 12, 2016 Report Posted July 12, 2016 Oh no. Dont worry. Top end is coming off friday. Going to start there. Theres to much money in this build just to run it and let it come apart How long ago did you build it? Quote
01_BlackBitch Posted July 12, 2016 Author Report Posted July 12, 2016 Maybe ill get lucky and its a loose flywheel Quote
Larry's Shee Posted July 13, 2016 Report Posted July 13, 2016 Maybe ill get lucky and its a loose flywheel Highly doubt it, not with the back and forth distance between "clunks" 1 Quote
01_BlackBitch Posted July 18, 2016 Author Report Posted July 18, 2016 Highly doubt it, not with the back and forth distance between "clunks" Rivets on flywheel came apart. Thanks for the replies! Quote
sleeper06 Posted July 18, 2016 Report Posted July 18, 2016 Check the crank bearing on that side for runout, I'll bet it's got some from that failure Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.