clutch basket play normal?

[RagunCajun]

I made a video of how much it moved. I also have a picture of where it seems to have word the little metal tab in the back. It's been about 4-5 weeks since i started up the bike and i think i heard a noise while letting it idle so i drained the fluids and checked for anything loose. Maybe it's just normal engine noises but i want to be sure. Of course i didnt think to video it before hurring to tear it down while i had time.

 

the worn area which i dont know if it was preexisting.

http://i240.photobucket.com/albums/ff111/raguncajun/20160605_151634_zpsbemkmysn.jpg

 

video of play
https://youtu.be/eoweq1DSJNc

 

edit* nothing is loose or worn etc. I may just be paranoid.

[sleeper06]

Totally normal with the straight cuts , they also make a sorta whining noise compared to stock

[sleeper06]

I'm not really seeing the worn area , where are you talking about

[RagunCajun]

Let me try to circle it with MS paint. It's the metal thin plate behind that gear. Give me about 30min..

[sleeper06]

Ok might be sleeping but I'll check in am

[RagunCajun]

No problem. I wont care to ride until next weekend. I appreciate the help.

 

http://i240.photobucket.com/albums/ff111/raguncajun/20160605_151634_zpskuybpbdd.jpg

[trickedcarbine]

Dude, those slingshots can make a diesel noise. That and straight cuts on my bike make a bit of ruckus.

[locogato11283]

It's fine. Run it.

 

All my straight cuts have play like that.

[Whitbread]

Dude, those slingshots can make a diesel noise. That and straight cuts on my bike make a bit of ruckus.

This ^. Straight cuts, slingshot, and mull Water pump gear here. At idle, it sounds very....unrefined.

[sleeper06]

Mighta been pre existing , pull on the splash guard , if it moves you got something up if not run it

[RagunCajun]

thanks guys.