antwony2000 Posted February 23, 2016 Report Posted February 23, 2016 Can someone point me to someone that has a lot of info on this? Thx Quote
n2otoofast4u Posted February 23, 2016 Report Posted February 23, 2016 10mil is the new 4mil.... 2 Quote
87sheerips Posted February 23, 2016 Report Posted February 23, 2016 Can someone point me to someone that has a lot of info on this? Thx Send motor to a site sponsor... Redline or fast. Be done 1 Quote
Big Mike NY Posted February 23, 2016 Report Posted February 23, 2016 10mil is the new 4mil.... Agreed! I never intended to build a 4 mil rather a 7 mil, which after talking with Sleeper06, we agreed it made sense to just step it up to a 10 mil, Driveline Cylidners ported by Sleeper! Quote
ClaudeMachining Posted February 23, 2016 Report Posted February 23, 2016 You need a case trench for anything bigger than 4mill. What do you want to do with your shee? Quote
RagunCajun Posted February 23, 2016 Report Posted February 23, 2016 Heck, just do a big bore too while you are at it. 521 and make 10 more hp all over the curve. Enough tq on pump to get your old john deere unstuck.Youll get more titties flashed ya than we do down here for mardi gras. At least tha'ts what redline told me. 2 Quote
badger99 Posted February 23, 2016 Report Posted February 23, 2016 How much would a for mill cost vs a 10mill Sent from my XT1254 using Tapatalk Quote
Bennett131 Posted February 23, 2016 Report Posted February 23, 2016 The difference in cost is basically the price of the crank and having your cases trenched. 1 Quote
sheerider11 Posted February 23, 2016 Report Posted February 23, 2016 Also the cost of the cylinders. Very few 10 mil stock cylinders around. Quote
Bennett131 Posted February 23, 2016 Report Posted February 23, 2016 Also the cost of the cylinders. Very few 10 mil stock cylinders around. Ah, I was assuming an aftermarket setup to begin with. Probably not cost effective to go 10 mil on stockers Quote
badger99 Posted February 23, 2016 Report Posted February 23, 2016 Thanks guys Sent from my XT1254 using Tapatalk Quote
pp13bnos Posted February 23, 2016 Report Posted February 23, 2016 Heck, just do a big bore too while you are at it. 521 and make 10 more hp all over the curve. Enough tq on pump to get your old john deere unstuck.Youll get more titties flashed ya than we do down here for mardi gras. At least tha'ts what redline told me. I was told I would get sand groupies, or at the very least be a redline groupie at the dave5.0 level. I'm starting to think Cam will say anything to sell a supercub now. Quote
RagunCajun Posted February 23, 2016 Report Posted February 23, 2016 At least he didn't send you nudes. Quote
antwony2000 Posted February 26, 2016 Author Report Posted February 26, 2016 How do i go about getting domes? Just building a 4 mil for street riding/ wheelies. Quote
trickedcarbine Posted February 26, 2016 Report Posted February 26, 2016 How do i go about getting domes? Just building a 4 mil for street riding/ wheelies.Street riding and wheelies, eh......? Before the butchers show up, the main things to know are:-what fuel do you wanna run? -is the crank trued/welded? -any added timing? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.