camatv Posted February 18, 2015 Report Posted February 18, 2015 i was still able to get the aux intake ( bbost port) bigger before i was done.. these were pics of "in progress". 1 Quote
registered user Posted February 19, 2015 Report Posted February 19, 2015 nice work. thats the aproach i took also. weld the pockets then the boyesens can be made rather large. still i didnt stop there. did some calculations and even with large boyesens i didnt feel it was enough. just my thoughts ive even heard of people welding on larger reed cages but thats alittle more involved than i wanna get Quote
locogato11283 Posted February 19, 2015 Report Posted February 19, 2015 I witnessed a set of cylinders on the dyno with bigger intakes welded on back in 2005. The builder was not impressed with the 1.5HP gain considering all the work. Quote
trickedcarbine Posted February 19, 2015 Report Posted February 19, 2015 Ya, place by me did some yz intakes. He wasn't very stoked. Quote
registered user Posted February 19, 2015 Report Posted February 19, 2015 i dont think anybody would expect +10hp from a slightly bigger reed block. 1.5hp sounds about right. i guess it depends how much free time you have and if its worth the effort. my self i wouldnt bother with it not a fan of standard V shaped blocks either. would rather have a vf style. banshee oem block has some of the same problems ive seen on other jap engines. stopper plugs off the boost port. it could be modified but i doubt youd gain much. still rather have the vf style Quote
camatv Posted February 19, 2015 Author Report Posted February 19, 2015 this engine is running v-2's. its a true 350cc in a tank of a chassis with a fat ass rider.. the motor really seems to have a much more linear power delivery and much stronger midrange.... these pics were about halfway through.. Quote
trickedcarbine Posted February 19, 2015 Report Posted February 19, 2015 i dont think anybody would expect +10hp from a slightly bigger reed block. 1.5hp sounds about right. i guess it depends how much free time you have and if its worth the effort. my self i wouldnt bother with it not a fan of standard V shaped blocks either. would rather have a vf style. banshee oem block has some of the same problems ive seen on other jap engines. stopper plugs off the boost port. it could be modified but i doubt youd gain much. still rather have the vf style I guess it's important to remember, when guys were doing that type of stuff or Triple exhaust, it was because there was no aftermarket jug, no V force reeds, etc . That was when guys had to scrounge for every hp possible and still they were well behind what's happening today. Quote
camatv Posted February 22, 2015 Author Report Posted February 22, 2015 exactilly.. to me it takes someone really wanting to either honor those old real builds OR really want to try to figure some things out on their own.. only a very few handfull builders will even do fully welded stock cylinders. to me its more of a challenge to myself than anything. i mean really anyone can bolt on a set of clean up cubs and go race.. as far as well behind whats happening today i don't really think so. some of those early motors were really groundbreaking engines overall. and a lot of them with more modern pipes/ clutch setups and stronger transmissions would still run with the best of today. some probably were even more efficient in making hp than the really big motors that are so popular today. 1 Quote
registered user Posted February 22, 2015 Report Posted February 22, 2015 cam is it going a bit far if a guy cuts the sides open . go big or go home i reckon Quote
sleeper06ccp Posted February 27, 2015 Report Posted February 27, 2015 my trail port ex/intake first two pics, drag intake next pic Sent from my iPhone using Tapatalk Quote
Pasi S. Posted February 27, 2015 Report Posted February 27, 2015 DAMN!! Looks good. Post more pics!! Quote
camatv Posted March 2, 2015 Author Report Posted March 2, 2015 the intake port i posted i am trying to achieve something by using a smaller duration case port. i'm in the middle of some trail low end port cyls i'll post them up in a few days. Quote
sleeper06 Posted March 2, 2015 Report Posted March 2, 2015 Have you ever tried your porting style with no sleeve , ive seen similar shit to yours done with no sleeve, must have been a lot easier Quote
camatv Posted March 6, 2015 Author Report Posted March 6, 2015 i did a triple port non welded stock bore on a 68mm big sleeve many many years ago. had to set up most of the porting then install the sleeve. it ran ok but i think with what i know now it would work much better. Quote
registered user Posted March 6, 2015 Report Posted March 6, 2015 you could probly put some pencil sized triples in without cutting the cylinder open. im sure it was done a thousand times back in the day by shade tree mechanics Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.