willaduncan Posted February 8, 2015 Report Posted February 8, 2015 Does the Vito's head require the small head stud o-rings? Sent from my iPhone using Tapatalk Quote
BANSHEE HP Posted February 8, 2015 Report Posted February 8, 2015 Negative, copper washers and acorn nuts Quote
Surfrjag Posted February 8, 2015 Report Posted February 8, 2015 Awfully narrow looking squishband for an mx motor.. How wide is it exactly? Quote
willaduncan Posted February 8, 2015 Author Report Posted February 8, 2015 Awfully narrow looking squishband for an mx motor.. How wide is it exactly? Idk never measured it not doing any MX for a while anyways now that I'm in SoCal the domes are just seeping coolant and I can't figure it out Sent from my iPhone using Tapatalk Quote
willaduncan Posted February 8, 2015 Author Report Posted February 8, 2015 O-rings are in good shape nothings pinched I set the head studs in and torqued to 22 ft lbs Sent from my iPhone using Tapatalk Quote
willaduncan Posted February 8, 2015 Author Report Posted February 8, 2015 Negative, copper washers and acorn nutsThe cascade acorn nuts came with polished washers Sent from my iPhone using Tapatalk Quote
registered user Posted February 8, 2015 Report Posted February 8, 2015 if theyre stainless steel washers those aint worth a shit because they wont smash. ace hardware might have copper Quote
willaduncan Posted February 8, 2015 Author Report Posted February 8, 2015 I doubt that would cause the leak between the head and dome.... Anyone else think that's the problem? Sent from my iPhone using Tapatalk Quote
trickedcarbine Posted February 8, 2015 Report Posted February 8, 2015 Who's domes? Are they Vito's or some replacements? It's possible they are a bit short so the O ring on the dome lip isn't getting a good seal. Had that issue when someone tried to put no name domes in an old Hemi Head. Quote
willaduncan Posted February 8, 2015 Author Report Posted February 8, 2015 FAST domes Sent from my iPhone using Tapatalk Quote
willaduncan Posted February 8, 2015 Author Report Posted February 8, 2015 The domes I have only have the brown o-ring on the cylinder side and the head has a black oring in the top of the head in the water jacket Sent from my iPhone using Tapatalk Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.