TeamRealtreeHD Posted October 2, 2014 Report Share Posted October 2, 2014 I'm looking to go from a +4 swingarm to a +5 or +6. Was thinking about having Stellar make me a chrome arched ladder bar in either +5 or +6. I will need skidplate mounts. Anybody have these swingers? What am I looking at for price? Thanks Quote Link to comment Share on other sites More sharing options...
special06shee Posted October 2, 2014 Report Share Posted October 2, 2014 Probably 6-800 range finished with bearings and pc. Shits not cheap. Quote Link to comment Share on other sites More sharing options...
TeamRealtreeHD Posted October 2, 2014 Author Report Share Posted October 2, 2014 That's about what I was figuring. I know the arched ladders are pricey compared to the standard tube. I am curious if he will mount me some skid mounts. I am going to try calling him tomorrow Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted October 2, 2014 Report Share Posted October 2, 2014 He will add skid plate mounts. I'm guessing he would need the actual skid plate though. Give Tim a call. Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted October 2, 2014 Report Share Posted October 2, 2014 < curious how to even get a skid plate on an arched arm. Might just have to roll with JDS rotor and sprocket guards. Quote Link to comment Share on other sites More sharing options...
TeamRealtreeHD Posted October 2, 2014 Author Report Share Posted October 2, 2014 I was thinking it wouldn't be an easy task, which is what sparked me to ask you guys. I wasn't sure if it was possible. I know Tyler was running an arched, but I don't think you run a skid plate? I think it will be a sick looking arm. Most guy run standard tube roundhouse here. Upgrading the entire suspension on the thing so I figured go big or go home Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted October 2, 2014 Report Share Posted October 2, 2014 Quote Link to comment Share on other sites More sharing options...
special06shee Posted October 2, 2014 Report Share Posted October 2, 2014 Thats titties there^^ 1 Quote Link to comment Share on other sites More sharing options...
TeamRealtreeHD Posted October 2, 2014 Author Report Share Posted October 2, 2014 Very nice Tyler. He's flexible then I see with what he can do. That's good. I'm gonna see if he can make me one with my current skidplate Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted October 2, 2014 Report Share Posted October 2, 2014 That is dope! Quote Link to comment Share on other sites More sharing options...
87sheerips Posted October 19, 2014 Report Share Posted October 19, 2014 Tim makes nice shit! I'll get you an arm in three-four weeks with sprocket and rotor guards for about $400 including bearings and hardware. Let me know. It's great having protection and also avoiding the big fixed skid plate getting hung up on everything and trapping dirt and rocks... Quote Link to comment Share on other sites More sharing options...
jriffe23 Posted October 22, 2014 Report Share Posted October 22, 2014 Two very tits site sponsors here. JDS and Stellar make some tits products. Definitely call them. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.