Jump to content

Recommended Posts

Posted

My choke tube is COMPLETLY off aswell !! I just noticed . And the choke plunger won't hold itself out . Can a vaccum leak come from the holes on the side of the carb where the tube is supposed to be ? Making it idle terrible

Posted

Probally 1/4. There's a thread another newbie question that has a pic. It was not to long ago. My plunger doesn't stay out and choke functions fine. I pull it out when cold starts up fine and I let it go.

 

 

Sent from my iPhone using Tapatalk

Posted

If you really dont wanna hold the choke for that amount of time you can always go out back on moms washline and grab a cloths pin..pull choke insert cloths pin....done....

Posted

I don't need the choke to start my bike . Always starts first few kicks . But there's is no choke tube between carb ? Does that make a vaccum leak ? And make it not run right? What exactly is the tube ? Just a piece of line that goes from on carb to the other ?

Posted

Yes the hose needs to be there. It's pulls fuel from the choke circuit in the left carb and feeds it to the right carb. That way you don't have two choke levers. If the hose isn't there it can/will idle and run like shit. Replace the hose and go from there

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...