stroker

[bansheeboy01]

what size stroker crank can I run with stock cylinders and with what size coolhead domes?

[bansheeboy01]

on pump gas

[Starwriter]

The size crank you can run is directly proportional to the credit limit on your Visa card and indirectly proportionate to the size of your Johnson.

[tdod101]

The size crank you can run is directly proportional to the credit limit on your Visa card and indirectly proportionate to the size of your Johnson.

And how much bitching your ears can take from the wife

[trickedcarbine]

what size stroker crank can I run with stock cylinders and with what size coolhead domes?

7mm stock cyls friggin rip! I've seen/heard about a few 10mm stock cyl set ups but they all come with way more issues and problems.

[trickedcarbine]

what size stroker crank can I run with stock cylinders and with what size coolhead domes?

7mm stock cyls friggin rip! I've seen/heard about a few 10mm stock cyl set ups but they all come with way more issues and problems.

[m671054]

realisticly 7mm. Technically you could probably do 14 but would need spacer welded to tops of cylinders and new sleeves for the setup. not cost effective and wouldnt perform as well as a aftermarket cylinder. this would not be an off the shelf type thing. doubt many builders would even do it nowadays. but you asked.you can do a 14mm wampus if your trying to look stock but anyone with half a clue would know whats up

[topfuel!]

I'm a fan of the 7mm stock cyl, total sleeper and 100+ hp easy. My next build will be 7mil stock cyl.

[gst_r]

I used to have a 7mm stock cylinder!! great engine !!! Here beating a supposed 8mm raptor (12mm) http://www.youtube.com/watch?v=aMX_4q62jr0