BANSHEEBEEFM2M Posted February 12, 2014 Report Share Posted February 12, 2014 Anybody know or have a link? Sent from my N8000_WHTE_CKT using Tapatalk Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted February 12, 2014 Report Share Posted February 12, 2014 If you have the old boot can you see if there is a number on it? I think chariot sells all different genuine mikuni boots. Maybe Sudco to. I remember seeing some distributor that had replacements for almost any application. Quote Link to comment Share on other sites More sharing options...
bluebanshee98 Posted February 12, 2014 Report Share Posted February 12, 2014 I could be wrong but I thought eBay had some Quote Link to comment Share on other sites More sharing options...
BANSHEEBEEFM2M Posted February 12, 2014 Author Report Share Posted February 12, 2014 The ebay ones dont fit. Does boss have a site? Sent from my N8000_WHTE_CKT using Tapatalk Quote Link to comment Share on other sites More sharing options...
fastbanshee8 Posted February 12, 2014 Report Share Posted February 12, 2014 I got my last set from FAST. Quote Link to comment Share on other sites More sharing options...
jbooker82 Posted February 12, 2014 Report Share Posted February 12, 2014 (edited) I run Mikuni VM34-200 boots on my Boss intake with 33PWK's. I believe you need Mikuni VM36-200 if your running a 36-38mm carb. Ebay has both sizes for around $20 each and free shipping. Edited February 12, 2014 by jbooker82 Quote Link to comment Share on other sites More sharing options...
jbooker82 Posted February 12, 2014 Report Share Posted February 12, 2014 Well you could have a couple different options if your running larger 36-40mm carbs. One has a 70mm spacing and the other has a 75mm bolt spacing. The VM36-200k has a 70mm spacing and the VM38-200 have a 75mm spacing. VM34-200 for 30-35mm PWK's has a 60mm spacing. They are on page 225 in Sudco's online catalog. Quote Link to comment Share on other sites More sharing options...
BANSHEEBEEFM2M Posted February 12, 2014 Author Report Share Posted February 12, 2014 I run 33mm mikunis Sent from my N8000_WHTE_CKT using Tapatalk Quote Link to comment Share on other sites More sharing options...
SAVAGE420 Posted February 12, 2014 Report Share Posted February 12, 2014 http://www.bansheedepot.com/proddetail.asp?prod=22-5805 You will need the 60MM bolt spread ones. Same as I use with 35's Quote Link to comment Share on other sites More sharing options...
BANSHEEBEEFM2M Posted February 12, 2014 Author Report Share Posted February 12, 2014 For boss intakes? The ones I bought from ebay are too small need a bigger boltspread Sent from my N8000_WHTE_CKT using Tapatalk Quote Link to comment Share on other sites More sharing options...
SAVAGE420 Posted February 12, 2014 Report Share Posted February 12, 2014 Knock offs from ebay? Go measure your bolt spread. 9.999 x out 10 you will need the 60mm ones for your carb size and alike. The 70's are for the bigger junk. Those are genuine in the link i posted. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.