trickedcarbine Posted January 8, 2014 Report Posted January 8, 2014 Sometimes a strap wrench helps Quote
2005shee Posted January 8, 2014 Author Report Posted January 8, 2014 ill try impact with it tomorrow its been to cold to work here the last couple of days - teens and no heat in garage. supposed to reach 40s tomorrow though so ill try some impacts tomorrow. also im planning on buying the pancake setup if I was to buy this what else would I need assuming I replace all the components from actuator out.http://www.ebay.com/itm/Chariot-Clutch-Pusher-Pancake-Bearing-Yamaha-Banshee-Stock-aftermarket-clutch-/251390983065?pt=Motors_ATV_Parts_Accessories&hash=item3a8811fb99&vxp=mtr Quote
2005shee Posted January 8, 2014 Author Report Posted January 8, 2014 also is that a decent price and if not where should I buy. Quote
uman1030 Posted January 8, 2014 Report Posted January 8, 2014 Not sure what regular price is but redline had them for $20 shipped during Christmas. http://www.bansheehq.com/forums/index.php?/topic/172017-REDLINE-DECEMBER-SPECIALS Quote
Finch Posted January 8, 2014 Report Posted January 8, 2014 <p>Redline Had the best price on them </p> Quote
2005shee Posted January 10, 2014 Author Report Posted January 10, 2014 what else would I need to buy besides that though? Quote
uman1030 Posted January 11, 2014 Report Posted January 11, 2014 what else would I need to buy besides that though? nothing, unless I'm misunderstanding the question. This replaces the whole clutch adjustment assembly. Quote
2005shee Posted January 11, 2014 Author Report Posted January 11, 2014 I meant would I still have to buy the long pushrod and the ball? or does it replace that to? Quote
Pastrykiller Posted January 11, 2014 Report Posted January 11, 2014 New rod, new ball and then the pancake. Quote
2005shee Posted January 12, 2014 Author Report Posted January 12, 2014 k thank you that's what I thought just wanted to double check before I bought everything. still having problems getting the clutch basket nut off though I cant get it to budge might have to take it into the shop to get them to take it off Quote
FullThrottle_06' Posted January 12, 2014 Report Posted January 12, 2014 k thank you that's what I thought just wanted to double check before I bought everything. still having problems getting the clutch basket nut off though I cant get it to budge might have to take it into the shop to get them to take it off If you can't get the nut off with an air impact you need to increase the pressure on your air compressor or buy a better impact or both. Quote
2005shee Posted January 13, 2014 Author Report Posted January 13, 2014 its a kobalt impact gun and a 155 psi craftsman air compressor running full psi. its turning fine but even with two pretty strong guys pushing on the plates it wont keep the inner basket still enough. Quote
sprinklerman Posted January 13, 2014 Report Posted January 13, 2014 <p>I just hold the inner plate with my hand. Shouldn't be a big deal.</p> Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.