BANSHEE CHAOS Posted November 27, 2013 Report Posted November 27, 2013 I will concur! Give it Hell! Quote
Deadbeat Posted November 27, 2013 Report Posted November 27, 2013 should prolly do a leakdown on the spare motor if its been shelved for a bunch of time, might have to put new seals through it Quote
Denny2424 Posted November 27, 2013 Author Report Posted November 27, 2013 I checked the compression. I don't have a leak down tester. There wasn't any oil leaking in obvious places. Sent from my SM-N900T using Tapatalk Quote
Deadbeat Posted November 27, 2013 Report Posted November 27, 2013 you arent looking for oil leaks you are looking for air leaks Quote
RagunCajun Posted November 27, 2013 Report Posted November 27, 2013 You can make a leak down tester for cheap. A seal kit is also about $50 or close to it. I forget the actual price. So for under $125 you can have new seals and proof you engine doesnt have an air leak.An air leak can even be something as simple as a tiny leak by the reeds or carbs. The price of a new seal kit and leak down tester is than a motor going lean or stress cause by you not being able to figure out why you are having issues jetting it correctly or it running right. Do it right. Youll thank yourself later. Quote
Denny2424 Posted November 27, 2013 Author Report Posted November 27, 2013 There is one for sale on ebay for $67.00. I'm just going to order it so I don't have to run around looking for all the parts to make it. Sent from my SM-N900T using Tapatalk Quote
Denny2424 Posted November 27, 2013 Author Report Posted November 27, 2013 I have a seal kit sitting on my shelf minus the shifter shaft seal. Sent from my SM-N900T using Tapatalk Quote
Denny2424 Posted December 6, 2013 Author Report Posted December 6, 2013 What do you guys think is the best way to clean my carbs? Brake cleaner and soap and water? Sent from my SM-N900T using Tapatalk Quote
trickedcarbine Posted December 7, 2013 Report Posted December 7, 2013 Best way..... Sonic cleaner Quote
Denny2424 Posted December 7, 2013 Author Report Posted December 7, 2013 What's the best way if you don't have a sonic cleaner? Sent from my SM-N900T using Tapatalk Quote
Larry's Shee Posted December 7, 2013 Report Posted December 7, 2013 Berrymans Carb dip, DO NOT soak rubber or plastic in it. "Bout $20 @ Autozone or such Quote
Denny2424 Posted December 7, 2013 Author Report Posted December 7, 2013 The works are nice but they need a rebuild. I had the raptor shocks already in nice shape. Sent from my SM-N900T using Tapatalk Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.