WINDYCITYJOHN400 Posted December 19, 2013 Report Posted December 19, 2013 Taller tires should help. Feather the gas or clutch out of the hole. (Once they start spinning, they keep spinning.) Move butt to back of seat. (Keep a close eye on that front end tho.) Quote
special06shee Posted December 19, 2013 Report Posted December 19, 2013 He weighs 73lbs... Body english will not help him . 1 Quote
dirtydownunder Posted December 19, 2013 Report Posted December 19, 2013 how much air pressure ya running ? Quote
locogato11283 Posted December 19, 2013 Report Posted December 19, 2013 Tire pressure isn't going to matter much if any on this motor. It's going to need more gear and tire. A set of 22" and 17/41 might get it done. M Ryan weighs about 140 pounds. He doesn't have enough ass to him to get the power down. Quote
dirtydownunder Posted December 19, 2013 Report Posted December 19, 2013 88/50 should hook up better than that on the street, i would have thought anyway. mine should be around that maybe a touch lower on the tq, and im 147lbs, 4,5,6 just does wheelies. with razr2 on 3psi, tho, on dirt it sucks ass. and just spins. Quote
lms1977 Posted December 19, 2013 Report Posted December 19, 2013 my old 465 serval with regular yfz450 rear tires would spin 1-5 on pavement with my 320lb ass on it I had a +8 swingarm on it glad to see ya got it running Quote
locogato11283 Posted December 19, 2013 Report Posted December 19, 2013 HP and TQ, what is that 10serval putting down RJD? I posted the dyno chart in the Dyno Forum. It's the one where Snipers kicked the shit out of everything else. Quote
Coupelx Posted December 20, 2013 Report Posted December 20, 2013 88/50 should hook up better than that on the street, i would have thought anyway. mine should be around that maybe a touch lower on the tq, and im 147lbs, 4,5,6 just does wheelies. with razr2 on 3psi, tho, on dirt it sucks ass. and just spins. at 2 psi in my razrs i can pitch it sideways in 6th and lay serious rubber. its serious fun but the tires are a serious fail. Quote
RagunCajun Posted December 20, 2013 Report Posted December 20, 2013 Damn that's some bad traction problems. Traction isnt looking good for my build. may have to keep the pro wedge's on my bike. damnit. Quote
dirtydownunder Posted December 20, 2013 Report Posted December 20, 2013 As serious as your seriously serious, serious comment is seriously serious, I don't think your bike could lay rubber let alone seriously lay rubber in 6th gear. Quote
Coupelx Posted December 20, 2013 Report Posted December 20, 2013 of course it wont. every serios person knows cheetahs are a serios joke. Quote
rjdgriff Posted December 20, 2013 Author Report Posted December 20, 2013 Iv been running 3.5 psi in my tires. I'm sure 22" tires are a must and I will see where I'm at with those before I toss on a 17 sprocket. I'm worried it will make the trails a little rough to ride if I'm sitting that tall. I'll try different things I guess. Maybe a 39 rear sprocket with 22" tires? Quote
RagunCajun Posted December 21, 2013 Report Posted December 21, 2013 I want to see some video. lots of it 1 Quote
rjdgriff Posted December 22, 2013 Author Report Posted December 22, 2013 I want to see some video. lots of itas soon as it gets warmer I'll get a bunch of vid for you all Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.