Juss11 Posted September 5, 2013 Report Posted September 5, 2013 I see a guy has a bunch of 30mm OKO, for like $150 a set shipped, in the 4-sale section. I was going to either get some PWK 28,33,34 mm etc for my 4mil dune port. Are these worth even messing with? I hear people say they run out of fuel on WOT but im sure that's just a float adjustment. Quote
ECshee Posted September 5, 2013 Report Posted September 5, 2013 Ive never run OKO's but from what ive heard/ read seems a decent amount of people have had good luck with em. Quote
wfobasheeboy Posted September 5, 2013 Report Posted September 5, 2013 I like the Ones i ran. Never had a problem with them. Quote
Juss11 Posted September 5, 2013 Author Report Posted September 5, 2013 Thanks guys, think I may grab a set Quote
Infamous039 Posted September 5, 2013 Report Posted September 5, 2013 I have had two sets of OKO carbs and had nothing but trouble with them, I couldn't get them to flow fuel efficiently and also they were a pain to tune. It could be that I had a used set that someone probably destroyed prior to me buying them. Quote
Dlatch Posted September 5, 2013 Report Posted September 5, 2013 known issues are the chrome plating on the throttle slider and also hard to get the jets (maybe a uk thing?) to be honest i have always liked my mikuni's easy to tune and just do the job but i guess a lot has to do with what your familiar with for instance i could not get on with dellorto's at all hated them Quote
RagunCajun Posted September 6, 2013 Report Posted September 6, 2013 Ran some on my 4 mil for a few years. Works fine Quote
camatv Posted September 6, 2013 Report Posted September 6, 2013 junk. get pwk's with chrome slides Quote
RagunCajun Posted September 6, 2013 Report Posted September 6, 2013 So what bad experience you have since you think they are junk. Post multiple reasons to back up your post. Explain yourself so we can learn. Quote
jbooker82 Posted September 6, 2013 Report Posted September 6, 2013 I would run the real thing if were me. Quote
dirtydownunder Posted September 6, 2013 Report Posted September 6, 2013 they have terrible casting flaws, they are cheap for a reason. when i had mine, i de burred them and drilled the main fuel port, and still could get it to run right, i took the bike to the dyno, he said "ha hah ha those carbs are junk" but he couldnt do anything (i thought he was just shit anyway) spoke to hjr about them as he did the port work on my bike back then. and he said they are pretty average carbs and people have problems with them. they are way hit n miss. you can get pwks for like 330/350 a set and mikunis for cheaper i think.. Quote
Kcskindeep84 Posted September 8, 2013 Report Posted September 8, 2013 If u have the cash get the pwks. Okos are hit and miss. Some of my friends hated them and nvr could get em right. I ran some on my 4 mil and nvr once had a problem. But if ur just really tight on cash they do well for the money. But just like with anything else in this world u get what u pay for! Quote
RagunCajun Posted September 8, 2013 Report Posted September 8, 2013 (edited) In any case, buy the better product so you ensure a better chance of it working right. Just save longer. Edited September 8, 2013 by RagunCajun Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.