robert0762 Posted June 16, 2013 Report Posted June 16, 2013 I am in the process of building a 10 mill super serval . Which builder should I go to for a custom set of domes for this motor? Who has built a good running 10 mil serv? Its gonna be pump gas also. Quote
vulvafan537240 Posted June 16, 2013 Report Posted June 16, 2013 Who's porting the top end? That's who I'd get the domes from. Quote
WINDYCITYJOHN400 Posted June 17, 2013 Report Posted June 17, 2013 Not having it ported Too bad. They really come alive when set up correctly..... Call Cameron at Redline Racing and let him chat with you about it. Quote
special06shee Posted June 17, 2013 Report Posted June 17, 2013 For an extra couple hundred bucks it is foolish not to have it ported imo. REDLINE! Quote
lms1977 Posted June 17, 2013 Report Posted June 17, 2013 Domes will make or break the motor.. if I did another serval I would run a super thick base gasket or double them up and cut a set of domes to match.. Porting cant hurt but once you get a dome that works for your riding style they run well Quote
robert0762 Posted June 17, 2013 Author Report Posted June 17, 2013 Domes will make or break the motor.. if I did another serval I would run a super thick base gasket or double them up and cut a set of domes to match.. Porting cant hurt but once you get a dome that works for your riding style they run well Why the thick base gasket , to raise ports? Quote
robert0762 Posted June 17, 2013 Author Report Posted June 17, 2013 I might just ride it as cast this season then once it gets cold send it out for porting Quote
possum Posted June 17, 2013 Report Posted June 17, 2013 If you bolt it up as cast, it will be back apart sooner then later. Quote
robert0762 Posted June 17, 2013 Author Report Posted June 17, 2013 If you bolt it up as cast, it will be back apart sooner then later. Thats not a huge problem. I am definetly gonna get some domes cut. I would like to ride it before porting to compare the difference. Also I'm coming from a 4 mill stock cyl mx port. I'm sure this will keep me busy for a while. Quote
2004LEBanshee Posted June 17, 2013 Report Posted June 17, 2013 possibly not. if your stocker was done right you might have a very similar motor. just less low end and more top. Quote
trickedcarbine Posted June 18, 2013 Report Posted June 18, 2013 possibly not. if your stocker was done right you might have a very similar motor. just less low end and more top.Close, but typically guys with 80 HP stockers have been saying the servals make more bottom and less top end. Attribute that to the displacement and lower port timing. Quote
lms1977 Posted June 18, 2013 Report Posted June 18, 2013 Yes to raise the port timing some... Absolutely loved mine it had more roll on power than you ever needed with great midrange it just was not great for drag racing against some of my buddies. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.